NX Nastran DMAP Programmer's Guide - Kxcad.net

436
OES
Table of element stresses or strains
Word Name Type Description
9 SMIN RS Minimum stress
10 MST RS Margin of Safety in Tension
11 MSC RS Margin of Safety in Compression
Words 2 through 11 repeat 002 times
TCODE,7 =1 Real / Imaginary
2 GRID I External Grid Point identification
number
3 CA RS Circumferential Angle
4 SCR RS Long. Stress at Point C
5 SDR RS Long. Stress at Point D
6 SER RS Long. Stress at Point E
7 SFR RS Long. Stress at Point F
8 SCI RS Long. Stress at Point C
9 SDI RS Long. Stress at Point D
10 SEI RS Long. Stress at Point E
11 SFI RS Long. Stress at Point F
Words 2 through 11 repeat 002 times
End TCODE,7
End SCODE,6
ELTYPE =70 Triangular plate element (CTRIAR)
SCODE,6 =0 Strain
TCODE,7 =0 Real
2 TERM CHAR4 "CEN"
3 GRID I Number active grids ID or grid
identification number
4 FD1 RS Fiber distance at Z1
5 EX1 RS Normal in x at Z1
6 EY1 RS Normal in y at Z1
7 ETXY1 RS Shear in xy at Z1