NX Nastran DMAP Programmer's Guide - Kxcad.net

DSAH
Generates data blocks required for DSAL module
GEOM3 Table of Bulk Data entry images related to static loads.
FRQRMF FRQRPR table for frequency response.
DFFDNF Table containing the derivatives of forcing frequencies with respect to
natural frequencies.
CASEFREQ Case Control table for modal or direct frequency response analysis and
based on ANALYSIS=MFREQ or DFREQ.
Output Data Blocks:
DBUG Buckling eigenvector matrix in the g-set associated with designed
(active) eigenvalues
DPHG Normal modes eigenvector matrix in the g-set associated with designed
(active) eigenvalues
CASEDSF Case Control table for all load cases and all design variables for the
perturbed configuration.
LBTAB Table of eigenvalues and generalized masses for retained buckling
eigenvalue responses
BDIAG Diagonal matrix of buckling divided by buckling generalized
differential stiffness matrix
LFTAB Table of eigenvalues and generalized masses for retained normal mode
eigenvalue responses
COGRID Correlation table between idcid/gid component for displacement
responses
COELEM Correlation table between idcid/eid/component for element responses
DSEDV Partitioning vector for retained divergence responses.
OINTDSF P-element output control table for the perturbed configuration.
PELSDSF P-element set table for the perturbed configuration.
DGEOM2 Table of Bulk Data entry images related to element connectivity and
scalar points for the perturbed configuration.
DGEOM3 Table of Bulk Data entry images related to static loads for the perturbed
configuration.
959