NX Nastran DMAP Programmer's Guide - Kxcad.net

AXMPR1 Builds a list of auxiliary model Bulk Data sections
Builds a list of auxiliary model Bulk Data sections.
Format:
AXMPR1 CASECC*,BULK*/
AMLIST/
S,N,AMLFLG $
Input Data Blocks:
CASECC* Family of auxiliary model Case Control sections.
BULK* Family of auxiliary model Bulk Data sections.
Output Data Blocks:
AMLIST List of auxiliary model identification numbers.
Parameters:
AXMPR1
Builds a list of auxiliary model Bulk Data sections
AMLFLG Output-logical-default=FALSE. Set to TRUE if AMLIST if generated.
Remarks:
1. All auxiliary model identification numbers that are specified on the AUXCASE
command in the Case Control section (258th word in CASECC*) are written to the
AMLIST table.
2. AXMPR1 checks for the following preliminary errors:
Verify the AUXCAS Case Control command specifies a unique and existing
BULK file.
Verify that each Bulk Data section is identified with a unique auxiliary model
number.
Example:
This is how AXMPR1 is used in subDMAP IFPL. CASEXX and IBULK are generated
from IFP1 and XSORT.
DBVIEW CASEXXAF = CASEXX (WHERE AUXMID>0) $
DBVIEW BULKAF = IBULK (WHERE AUXMID>0) $
AXMPR1 CASEXXAF,BULKAF/AMLIST $
801