NX Nastran DMAP Programmer's Guide - Kxcad.net

1187
MDCASE
Partitions the Case Control table
MDCASE Partitions the Case Control table
Partitions the Case Control table into separate Case Control tables based on the
ANALYSIS Case Control command.
Format:
MDCASE CASECC,EDOM/
CASESTAT,CASEMODE,CASEBUCK,CASEFREQ,CASECEIG,
CASEMTRN,CASESAER,CASEDVRG,CASEFLUT,CASESMST,
CASESMEM,CASEHEAT,CASEUPSE,CASESADV,CASESNMB,
CASEXX/
S,N,STATCC/S,N,MODECC/S,N,BUCKCC/S,N,DFRQCC/
S,N,MFRQCC/S,N,DCEIGCC/S,N,MCEIGCC/S,N,MTRNCC/
S,N,SAERCC/S,N,DVRGCC/S,N,FLUTCC/S,N,SMSTCC/
S,N,SMEMCC/S,N,HEATCC/S,N,UPSECC/S,N,DESOBJ/
S,N,DESGLB/S,N,OBJSID/SEPRTN /S,N,WVFLG $
Input Data Blocks:
CASECC Table of Case Control command images.
EDOM Table of Bulk Data entries related to design sensitivity and
optimization.
Output Data Blocks:
CASESTAT Case Control table for static analysis and based on
ANALYSIS=STATICS.
CASEMODE Case Control table for normal modes analysis and based on
ANALYSIS=MODES.
CASEBUCK Case Control table for buckling analysis and based on
ANALYSIS=BUCK.
CASEFREQ Case Control table for modal or direct frequency response analysis
and based on ANALYSIS=MFREQ or DFREQ.
CASECEIG Case Control table for modal or direct complex eigenvalue analysis
and based on ANALYSIS=MCEIG or DCEIG.
CASEMTRN Case Control table for modal transient analysis and based on
ANALYSIS=MTRAN.
CASESAER Case Control table for aerostatic analysis and based on
ANALYSIS=SAERO.