NX Nastran DMAP Programmer's Guide - Kxcad.net

DOM10
Prints initial and final results for design optimization
DOM10 Prints initial and final results for design optimization
In design optimization, prints the initial and final results for the approximate
optimization problem.
Format:
DOM1 DESTAB,XINIT,X0,CNTABRG,CVALRG,CVALO,DVPTAB*,
PROPI*,PROPO*,R1TABRG,R1VALRG,R1VALO,RSP2RG,
R2VALRG,R2VALO,OPTPRMG,OBJTBG,DRSTBLG,TOL1,FOL1,
FRQRPRG,DBMLIB,BCON0,BCONXI,WMID,RSP3RG,R3VALRG,
R3VALO//
DESCYCLE/DESMAX/OBJIN/OBJOUT/EIGNFREQ/PROTYP/
RESTYP $
Input Data Blocks:
DESTAB Table of design variable attributes
XINIT Matrix of initial values of the design variable
XO Matrix of final (optimized) values of the design variables.
CNTABRG Table of retained constraint attributes
CVALRG Matrix of initial constraint values
CVALO Matrix of final (optimized) constraint values.
DVPTAB* Family of tables of attributes of the designed properties by internal
property identification number order.
PROPI* Family of matrices of initial property values.
PROPO* Family of matrices of final (optimized) property values.
R1TABRG Table of attributes of the retained first level responses
R1VALRG Matrix of initial values of the retained first level responses
R1VALO Matrix of final (optimized) values of the retained first level responses.
RSP2RG Table of attributes of the retained second level responses
R2VALRG Matrix of initial values of the retained second level responses
R2VALO Matrix of final values of the second level responses
OPTPRMG Table of optimization parameters
OBJTBG Design objective table. Objective attributes with retained response
identification number.
905