NX Nastran DMAP Programmer's Guide - Kxcad.net

576
RESP12
Table of second level (synthetic) responses
RESP12 Table of second level (synthetic) responses
Table of second level (synthetic) responses.
Record 0 - HEADER
Word Name Type Description
1 NAME(2) CHAR4 Data block name
Record 1 - Repeat - For each Type 2 response
Word Name Type Description
1 IR2ID I Internal response identification number
2 R2ID I External response identification number
3 LABEL(2) CHAR4 Label
5 EQID I Equation identification number
6 REG I Region identification number
7 ND(C) I Number of design variables
8 NC(C) I Number of constants from constant table
(Data block DTB)
9 NR(C) I Number of type one responses
10 NCORD(C) I Number of coordinates
11 NPROP1(C) I Number of type one properties
12 NCONP1(C) I Number of type one connectivity
properties
13 NMATP1(C) I Number of type one material properties
14 NPROP2(C) I Number of type two properties
15 NCONP2(C) I Number of type two connectivity
properties
16 NMATP2(C) I Number of type two material properties
17 NRR2(C) I Number of referenced type two
responses
18 ARGDSP I Number of discrepancy on arguments