NX Nastran DMAP Programmer's Guide - Kxcad.net

1335
RMAXMIN
Searches result tables during SOL 12 and 112.
RMAXMIN Searches result tables during SOL 12 and 112.
Searches stress, force and displacement tables during SOL 12 and 112 for extreme
values.
Format:
RMAXMIN OUGV1,OEF1,OES1/OUGV1MX,OEF1MX,OES1MX/IFABS,IAPPN,
IDIAG $
Input Data Blocks:
OUGV1 Table of displacements or accelerations in SORT1 format.
OEF1 Table of element forces in SORT1 format.
OES1 Table of element stress in SORT1 format.
Output Data Blocks:
OUGV1MX Displacement output datablock.
OEF1MX Force output datablock.
OES1MX Stress output datablock.
Parameters:
IFABS Input parameter to determine how output is calculated:
IFABS = 0 algebraic maximum values calculated. (default)
IFABS = 1 absolute maximum values calculated.
IFABS = 2 algebraic minimum values calculated.
IAPPN Input parameter to modify how approach code is written:
IAPPN = 0 write approach code found in datablock header. (default)
IAPPN > 0 write approach code iappn.
IDIAG Determines what diagnostic output is written to f06 file:
IDIAG = 0 send no diagnostic output to .f06 file. (default)
IDIAG > 1 send brief summary of module input to .f06 file.
IDIAG > 2 send operations trace to .f06 file.
IDIAG > 3 send i/o statistics to .f06 file.
IDIAG > 4 send grid point statistics to .f06 file.
IDIAG > 5 not used.
IDIAG > 6 dump data read to .f06 file.