NX Nastran DMAP Programmer's Guide - Kxcad.net

438
OES
Table of element stresses or strains
Word Name Type Description
15 EY2I RS Normal in y at Z2
16 ETXY2R RS Shear in xy at Z2
17 ETXY2I RS Shear in xy at Z2
Words 3 through 17 repeat 004 times
End TCODE,7
SCODE,6 =01 Stress
TCODE,7 =0 Real
2 TERM CHAR4 "CEN"
3 GRID I Number active grids identification
number or grid identification number
4 FD1 RS Fiber distance at Z1
5 SX1 RS Normal in x at Z1
6 SY1 RS Normal in y at Z1
7 TXY1 RS Shear in xy at Z1
8 A1 RS Theta (Shear Angle) at Z1
9 MJRP1 RS Major Principal at Z1
10 MNRP1 RS Minor Principal at Z1
11 TMAX1 RS Maximum Shear at Z1
12 FD2 RS Fiber distance at Z2
13 SX2 RS Normal in x at Z2
14 SY2 RS Normal in y at Z2
15 TXY2 RS Shear in xy at Z2
16 A2 RS Theta (Shear Angle) at Z2
17 MJRP2 RS Major Principal at Z2
18 MNRP2 RS Minor Principal at Z2
19 TMAX2 RS Maximum Shear at Z2
Words 3 through 19 repeat 004 times
TCODE,7 =1 Real / Imaginary