Design and Construction Handbook - Los Angeles World Airports

Guide Specification
I. FCC Federal Communications Commission
J. FM Factory Mutual
K. IEEE Institute of Electrical and Electronics Engineers
L. ISO International Standards Organization
M. NEC National Electrical Code
N. NEMA National Electrical Manufacturers’ Association
O. NESC National Electrical Safety Code
P. NFPA National Fire Protection Association
Q. OSHA Occupational Safety and Health Administration
R. TIA Telecommunications Industry Association
S. TR Telecommunications Room
T. TWC Tenant Wiring Closet
U. UFBC Uniform Fire Prevention and Building Code
V. UL Underwriter’s Laboratories, Inc.
1.3 SUBMITTALS
A. Comply with all LAWA submittal procedures given in other Sections. The following is in
addition to or complementary to any requirements given elsewhere.
B. Submit a letter of approval or other certification from the manufacturer indicating that the
Bidder is a manufacturer certified installer of the proposed cabling system(s) (submit with Bid).
C. Submit a detailed bill-of-materials listing all manufacturers, part numbers, and quantities that
the Bidder proposes to use in this project. Submit a two-foot length sample of each fiber cable
type/count to be installed.
D. Submit manufacturers’ data sheets for proposed racks and cabinets, termination equipment,
cable management or support hardware, power and grounding equipment, and labeling material.
E. Submit manufacturers’ instructions for storage, handling, protection, examination, preparation,
operation, and installation of all products. Include any application conditions or limitations of
use stipulated by any product testing agency.
F. Submit all applicable Material Safety Data Sheets.
BASIC TELECOMMUNICATIONS REQUIREMENTS
27 05 00 - 2
Communication Systems