Design and Construction Handbook - Los Angeles World Airports

Design and Construction Handbook
37 of 84
Handbook (Version 3) 01.15.11
o Verify new and existing utilities that relate to the renovation
project
j. Floor Plans
o Finalize all information mentioned in the previous submittal
o Verify that all floor depression are indicated on the floor
plans
o Perform final discipline coordination
o Verify that all disciplines are utilizing the same background
with the same match lines
o Perform a final quality control review. Verify the accuracy
of all detail call outs, references, partition tags, fire ratings,
etc., etc.
k. Enlarged Floor Plans
o Finalize all information mentioned in the previous submittal
o Verify that rest room finishes, accessories and all specialty
items are specified in the project manual
l. Roof Plan
o Finalize all roof penetrations and equipment pads
o Perform a final cross check will related disciplines
m. Reflected Ceiling Plan
o Perform final coordination with Mechanical, Electrical,
Security and Communication drawings
o Confirm that ceilings s are in compliance with LADBS
Safety Document# P/BC 2008-040: Recommended
Standards for Suspended Ceiling Assemblies
o Verify that ceiling framing can support 20 pounds of
combined ceiling, mechanical, electrical, and plumbing
loads
o In the case that the ceiling loads, including light fixtures,
exceed four pounds per square foot, both the vertical and
lateral support systems are to be substantiated by
corresponding structural calculations
n. Door Schedule
o Perform a final cross check with the floor plan and determine
that all doors are included in the door schedule with the
proper hardware group
o. Finish Plan
o Verify that all finishes are indicated in the specifications
p. Furniture Plan
q. Interior Elevations