Design and Construction Handbook - Los Angeles World Airports

Guide Specification
4. System configuration with peripheral devices, batteries, power supplies, diagrams,
modems, and interconnections.
5. Description and sequence of operation for operating, user, and application software.
6. Use terminology in submittals conforming to ASME MC85.1.
B. Product Data: Submit data for each system component and software module.
C. Manufacturer's Installation Instructions: Submit installation instruction for each control
system component.
D. Manufacturer's Certificate: Certify products meet or exceed specified requirements.
1.5 CLOSEOUT SUBMITTALS
A. Project Record Documents: Record actual locations of control components, including control
units, thermostats, and sensors.
1. Revise shop drawings to reflect actual installation and operating sequences.
2. Submit data specified in "Submittals" in final "Record Documents" form.
B. Operation and Maintenance Data:
1. Submit interconnection wiring diagrams complete field installed systems with identified
and numbered, system components and devices. Submit paper copies in 3-ring binder and
electronic copy on CD or DVD.
2. Submit keyboard illustrations and step-by-step procedures indexed for each operator
function.
3. Submit inspection period, cleaning methods, cleaning materials recommended, and
calibration tolerances.
1.6 QUALIFICATIONS
A. Manufacturer: Company specializing in manufacturing products specified in this section with
minimum three years documented experience, and with service facilities within 100 miles of
Project.
B. Installer: Company specializing in performing Work of this section with minimum three years
documented experience approved by manufacturer.
1.7 PRE-INSTALLATION MEETINGS
A. Convene minimum two weeks prior to commencing work of this section or at the direction of
LAWA or the General Contractor.
1.8 FIELD MEASUREMENTS
A. Verify field measurements prior to fabrication.
DIRECT-DIGITAL CONTROL SYSTEM FOR HVAC
23 09 23 - 2 Mechanical Systems