Design and Construction Handbook - Los Angeles World Airports

• Finalize connection details to existing structure with the Structural
Engineer of Record.
• Provide interfacing details with existing equipment including off site
systems including portals.
f. Schedule
• Provide a schedule of security devices that has been coordinated with
the architectural door hardware schedule using common
nomenclature.
g. Miscellaneous
• Installation standards and LAWA specific commissioning and testing
procedures are to be included in the specifications.
Additional Required Documents and Information:
• All Architectural drawings are to be stamped and signed by a professional
Architect registered in the State of California
• All Mechanical, Electrical, Plumbing and Fire Protection Drawings are to be
stamped with appropriate professionals and signed by the corresponding design
engineer of record who is registered in the State of California
• All Structural drawings and calculations are to be stamped and signed by the
Professional Engineer of Record that is registered in the State of California
• Submit updated Cost Estimate
• Submit updated Construction Schedule, Phasing Plan and Site Logistics Plans
• Provide a Cost Loaded Schedule per LAWA standards (when required)
• Submit a narrative describing the phasing strategy emphasizing any potential
impacts to other assigned areas within the Terminal Building. This is in addition
to the phasing drawings listed in the drawing requirements
• Provide a separate and complete set of Discipline Coordination Drawings
• Provide a full set of Specifications in CSI Format, including schedules for doors
and hardware, equipment, furniture, finishes, etc..
• Provide a letter addressed to LAWA signed by the Architect of Record certifying
that all elements of the design, including but not limited to, casework, equipment
and signage, indicated on their drawings are ADA compliant
• Submit final LAWA Sustainability Scorecard
Design and Construction Handbook
42 of 84
Handbook (Version 3) 01.15.11