12.02.2013 Views

Design and Construction Handbook - Los Angeles World Airports

Design and Construction Handbook - Los Angeles World Airports

Design and Construction Handbook - Los Angeles World Airports

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Guide Specification<br />

E. Sensor Operated Flush Valve: ASME A112.18.1; concealed rough brass or exposed chrome<br />

plated, diaphragm type with low voltage or battery operated solenoid operator, infrared sensor<br />

<strong>and</strong> over-ride button in chrome plated plate, wheel h<strong>and</strong>le stop <strong>and</strong> vacuum breaker; 0.125<br />

maximum gallon per flush.<br />

F. Urinal Flushometers:<br />

1. Sensor-Operated Hard-Wired:<br />

a. Concealed diaphragm type, chrome plated, sensor operated flushometer valve. Low<br />

consumption valves shall have dual filtered type diaphragm kit for flush discharge<br />

accuracy. Valve shall be non-hold-open, solenoid operator, skirted high back<br />

pressure vacuum breaker with bottom hex coupling nut, back-check control stop will<br />

have free spinning v<strong>and</strong>al resistant stop cap <strong>and</strong> sweat solder adapter kit with cast<br />

set screw wall flange. Valve shall include Optima EL-1500 self-adaptive infrared<br />

sensor with indicator light, (2) chrome plated wall cover plates (for 2-gang electrical<br />

box) with v<strong>and</strong>al resistant screws. Valve, body, cover, tailpiece <strong>and</strong> control stop<br />

shall be in conformance with ASTM Alloy Classification for Semi-Red Brass.<br />

Valve shall be Sloan WEUS-1010.1311-0.13 ES-S.<br />

G. Flush (Metering) Valve: ASME A112.18.1; exposed chrome plated, porous felt type for 1/2<br />

inch supply with oscillating h<strong>and</strong>le, or push button, screwdriver stop <strong>and</strong> vacuum breaker.<br />

H. Carriers:<br />

1. Manufacturers:<br />

a. J.R. Smith.<br />

b. Zurn.<br />

c. MiFAB.<br />

2. Wall Mounted Carrier: ASME A112.6.1; cast iron or ductile iron frame with tubular legs,<br />

lugs for floor <strong>and</strong> wall attachment, threaded fixture studs for fixture hanger, bearing<br />

studs, elastometric gasket or approved setting compound, for fixture to flange connection.<br />

I. Disabled Access: Approved type where required.<br />

2.4 LAVATORIES<br />

A. Manufacturers: Vitreous China/Porcelain Enameled Cast Iron.<br />

1. American St<strong>and</strong>ard.<br />

2. Kohler.<br />

3. Crane.<br />

B. Manufacturers: Integral basin type.<br />

1. Corian.<br />

C. Manufacturers: Faucets.<br />

PLUMBING FIXTURES<br />

22 40 00 - 5 Plumbing Systems

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!