Design and Construction Handbook - Los Angeles World Airports

Norman Y. Mineta San José International Airport
Scope of Services Draft
8.2.4.4.1 Foundation Plan(s) at same scale as architectural plans including:
8.2.4.4.1.1 Foundation layout
8.2.4.4.1.2 Footing elevations
8.2.4.4.1.3 Column grid
8.2.4.4.1.4 Typical and special details
8.2.4.4.2 Floor Plan(s) at same scale as architectural plans showing:
8.2.4.4.2.1 Floor elevations
8.2.4.4.2.2 Column grid
8.2.4.4.2.3 Floor openings
8.2.4.4.2.4 Section and detail indications
8.2.4.4.3 Framing Plans including:
8.2.4.4.3.1 Beam, girder and joist sizes
8.2.4.4.3.2 Slab openings and depressions
8.2.4.4.3.3 Slab elevations
8.2.4.4.3.4 Section and detail indications
8.2.4.4.3.5 Roof Plan(s) similar to floor plan
8.2.4.4.4 Sections
8.2.4.4.4.1 Typical trusses, beams, girders and joists
8.2.4.4.4.2 Columns and foundations
8.2.4.4.4.3 Walls
8.2.4.4.5 Schedules
8.2.4.4.6 Details
8.2.4.4.6.1 Footing
8.2.4.4.6.2 Truss
8.2.4.4.6.3 Beam
8.2.4.4.6.4 Joist
8.2.4.4.6.5 Column
8.2.4.5 Mechanical
Mechanical drawings shall indicate all requirements and special
conditions for HVAC, plumbing, waste, fire protection and control
systems
8.2.4.5.1 Site Plan indicating connection to offsite utilities
8.2.4.5.2 Floor Plans for each system, at same scale as architectural,
showing:
8.2.4.5.2.1 Detailed system layouts indicating sizes of system
components
8.2.4.5.2.2 Location of mechanical equipment rooms
8.2.4.5.2.3 Location of all equipment required for system operation,
showing clearances and interfaces with other equipment
8.2.4.5.2.4 Complete extent of system routing, including connections
to existing systems
8.2.4.5.3 Large Scale Plans
8.2.4.5.4 Sections
8.2.4.5.5 Riser diagrams
8.2.4.5.6 Equipment and Fixture Schedules
8.2.4.5.7 Details
8.2.4.6 Electrical
Revision G – 15 August 2006 CHAPTER III-01 - Design Tasks And Deliverables - 33