Design and Construction Handbook - Los Angeles World Airports

Norman Y. Mineta San José International Airport
Scope of Services Draft
8.2.4.3.6.3 Typical wall construction
8.2.4.3.6.4 Back up structure and abutting floor system
8.2.4.3.6.5 Window type and location
8.2.4.3.6.6 Exterior finishes (masonry coursing), insulation, and
interior finishes, furring
8.2.4.3.6.7 Mechanical penetrations
8.2.4.3.6.8 Parapet and roof construction
8.2.4.3.6.9 Key all sections to elevations
8.2.4.3.7 Large scale details (scale as required) for clarifying critical or
relevant details, keyed to floor plans sections or other drawings as
required for:
8.2.4.3.7.1 Window types, sill, mullions, jam and head details, glazing
type and venting
8.2.4.3.7.2 Hollow metal (typical only)
8.2.4.3.7.3 Frame types (typical only)
8.2.4.3.7.4 Metal and glass walls
8.2.4.3.7.5 Special details for surface trim and finishes
8.2.4.3.7.6 Special design related items, as required
8.2.4.3.7.7 Built in furniture, counters, display cases and millwork
8.2.4.3.7.8 Interior elevations of typical and special spaces, interfaced
with and cross-referenced floor and reflected ceiling plans.
Indicate:
8.2.4.3.7.9 Suspended ceiling lines, floor elevations and level changes
8.2.4.3.7.10 Mechanical, electrical and structural conditions and
restrictions
8.2.4.3.7.11 Wall treatment and materials clearly identifying design
intent
8.2.4.3.7.12 All pertinent notes and dimensions
8.2.4.3.8 Reflected ceiling plans for typical and special spaces including
exterior soffits and canopies if required. Indicate:
8.2.4.3.8.1 Lighting layout
8.2.4.3.8.2 Soffits, coves, furrings
8.2.4.3.8.3 Skylights
8.2.4.3.8.4 Ceiling material, special features
8.2.4.3.8.5 Acoustical treatments
8.2.4.3.8.6 Relationship with partitions
8.2.4.3.8.7 Interface with window details
8.2.4.3.8.8 Sprinklers
8.2.4.3.8.9 Access panels
8.2.4.3.8.10 HVAC registers, etc.
8.2.4.3.8.11 Exposed structure
8.2.4.3.9 Schedules - comprehensive, keyed to floor plans and elevations,
listing:
8.2.4.3.9.1 Interior finishes
8.2.4.3.9.2 Doors and frames
8.2.4.3.9.3 Door Hardware
8.2.4.3.9.4 Windows and glazing
8.2.4.3.9.5 Louvers
8.2.4.3.9.6 Partition Types
8.2.4.4 Structural
Revision G – 15 August 2006 CHAPTER III-01 - Design Tasks And Deliverables - 32