Design and Construction Handbook - Los Angeles World Airports

Guide Specification
E. Requirements of Regulatory Agencies:
1. Codes, Permits and Fees: Where the Contract Documents exceed minimum
requirements, the Contract Documents take precedence. Where provisions differ
in regard to code application, size, quality, quantity or type of equipment,
Contractor shall include in the bid, costs for the most costly provision either
denoted in the specifications or on the drawings. This provision shall apply as an
amendment to the California Public Contracts Code.
a. Comply with all requirements for permits, licenses, fees and Code.
Permits, licenses, fees, inspections and arrangements required for the
Work shall be obtained by the Contractor at his expense, unless
otherwise specified.
b. Comply with the requirements of the applicable utility companies
serving the Project. Make all arrangements with the utility companies for
proper coordination of the Work.
F. Shop Drawings and Submittals: Submittals on all material prior to installation.
1. Shop drawings shall be submitted on, but not limited to, the following:
2. Equipment Wiring Connections
3. Medium Voltage Cables
4. Low Voltage Electrical Power Conductors and Cables
5. Grounding and Bonding for Electrical Systems
6. Hangers and Supports for Electrical Systems
7. Raceway and Boxes for Electrical Systems
8. Underground Ducts and Raceways for Electrical Systems
9. Vibration and Seismic Controls for Electrical Systems
10. Identification for Electrical Systems
11. Short Circuit and Overcurrent Protective Device Coordination Study
12. Web Based Power Monitoring Communications System
13. Lighting Control Devices
14. Network Lighting Control Systems
15. Medium Voltage Transformers
16. Metal Clad Switchgear (VacClad) B Medium Voltage
17. 34.5 kV Metering Switchgear
18. Low Voltage Transformers
19. Switchboards
20. Panelboards
21. Motor Control Centers
22. Enclosed Bus Assemblies
23. Electrical Cabinets and Enclosures
24. Wiring Devices
25. Fuses
26. Enclosed Switches
27. Enclosed Circuit Breakers
28. Enclosed Transfer Switches
29. Enclosed Controllers
30. Variable Frequency Motor Controllers
31. Engine Generators
BASIC ELECTRICAL REQUIREMENTS
26 05 02 - 3 Electrical Systems