Design and Construction Handbook - Los Angeles World Airports

SIGNAGE
10 14 23 - 18
Guide Specification
E. Prior to installation, confirm all electrical locations and requirements with LAWA.
3.3 CLEAN UP
A. Keep areas of work clean, neat and orderly at all times. Clean surfaces, inside and out. Use
approved cleaners if necessary to remove dirt.
B. Protective coverings and strippable films shall be removed at a time that will afford the greatest
protection of the furniture. Surfaces shall be cleaned to remove excess glazing and sealant
compounds, dirt, and other substances.
C. Upon completion of work and before final acceptance, remove tools, surplus materials,
apparatus, and debris from the site. Leave the site in a neat, clean condition, acceptable to the
Engineer. Wash, clean, and leave paved areas without stains.
3.4 FINAL INSPECTION AND ACCEPTANCE
A. Upon completion of work, a final inspection for acceptance will be performed by LAWA.
B. All mock-ups and unused submittals shall be removed from site prior to final acceptance.
C. Submit operation manuals, tools, and keys as specified in this Section.
END OF SECTION 10 14 00
Wayfinding and Signage