Design and Construction Handbook - Los Angeles World Airports

More documents

Recommendations

Info

Guide Specification 3.3 CHILLED-WATER VALVE SCHEDULE A. Pipe NPS 2 and Smaller: 1. Bronze and Brass Valves: May be provided with solder-joint ends instead of threaded ends. 2. Ball Valves: Two piece, full port, brass with brass trim. 3. Bronze Swing Check Valves: Class 125, bronze disc. 4. Bronze Gate Valves: Class 125, RS, bronze. 5. Bronze Globe Valves: Class 125, bronze disc. B. Pipe NPS 2-1/2 and Larger: 1. Iron Valves, NPS 2-1/2 to NPS 4: May be provided with threaded ends instead of flanged ends. 2. Iron, Single-Flange Butterfly Valves, NPS 2-1/2 to NPS 12: 200 CWP, EPDM seat, aluminum-bronze disc. 3. Iron, Single-Flange Butterfly Valves, NPS 14 to NPS 24: 150 CWP, EPDM seat, aluminum-bronze disc. 4. Iron, Grooved-End Butterfly Valves, NPS 2-1/2 to NPS 12: 175 CWP. 5. Iron Swing Check Valves: Class 125, metal seats. 6. Iron, Grooved-End Check Valves, NPS 3 to NPS 12: 300 CWP. 7. Iron, Center-Guided Check Valves: Class 125, globe, metal seat. 8. Iron Gate Valves: Class 125, OS&Y. 9. Iron Globe Valves: Class 125. 10. Lubricated Plug Valves: Class 125, regular gland, flanged. 3.4 HEATING-WATER VALVE SCHEDULE A. Pipe NPS 2 and Smaller: 1. Bronze and Brass Valves: May be provided with solder-joint ends instead of threaded ends. 2. Ball Valves: Two piece, full port, brass with brass trim. 3. Bronze Swing Check Valves: Class 125, bronze disc. 4. Bronze Gate Valves: Class 125, RS. 5. Bronze Globe Valves: Class 125, bronze disc. B. Pipe NPS 2-1/2 and Larger: 1. Iron Valves, NPS 2-1/2 to NPS 4: May be provided with threaded ends instead of flanged ends. 2. Iron, Single-Flange Butterfly Valves, NPS 2-1/2 to NPS 12: 200 CWP, EPDM seat, aluminum-bronze disc. 3. Iron, Single-Flange Butterfly Valves, NPS 14 to NPS 24: 150 CWP, EPDM seat, aluminum-bronze disc. 4. Iron, Grooved-End Butterfly Valves, NPS 2-1/2 to NPS 12: 175 CWP. 5. Iron Swing Check Valves: Class 125, metal seats. 6. Iron, Grooved-End Check Valves, NPS 3 to NPS 12: 300 CWP. GENERAL-DUTY VALVES FOR HVAC PIPING 23 05 23 - 6 Mechanical Systems
Guide Specification 7. Iron, Center-Guided Check Valves: Class 125, globe, metal seat. 8. Iron Gate Valves: Class 125, OS&Y. 9. Iron Globe Valves, NPS 2-1/2 to NPS 12: Class 125. 3.5 HIGH TEMPERATURE HOT WATER VALVE SCHEDULE A. Lubricated plug valves. END OF SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING 23 05 23 - 7 Mechanical Systems
Page 1 and 2:
Design and Construction Handbook Ap
Page 3 and 4:
1.31.6 Utilities 1.31.7 Product, Ma
Page 5 and 6:
22.11.00 Facility Water Distributio
Page 7 and 8:
Supplemental Drawings (To be issued
Page 9 and 10:
1.0 General Requirements 1.1 Scope,
Page 11 and 12:
inclusive of all information availa
Page 13 and 14:
The 2008 Los Angeles Electrical Cod
Page 15 and 16:
Design and Construction Handbook 15
Page 17 and 18:
1.15 Tenant Projects Approvals - Te
Page 19 and 20:
Issues Addressed Design Impacts to
Page 21 and 22:
e responsible for assisting in the
Page 23 and 24:
c. Egress Plan • Update Occupant
Page 25 and 26:
• Locate and identify employee ch
Page 27 and 28:
• Update sprinkler layout. • In
Page 29 and 30:
g. Zone Plan (if required). • Ind
Page 31 and 32:
• Identify all primary materials
Page 33 and 34:
• Locate all receptacles • Loca
Page 35 and 36:
3. Final Construction schedule, inc
Page 37 and 38:
Page 39 and 40:
Mechanical Drawings: a. Sheet Index
Page 41 and 42:
Communication Drawings: a. Sheet In
Page 43 and 44:
• Make certain that the signature
Page 45 and 46:
1. Piping shall be coordinated with
Page 47 and 48:
other facilities. Constantly secure
Page 49 and 50:
d. The face of the barricade expose
Page 51 and 52:
e) No unapproved signage such as wa
Page 53 and 54:
Page 55 and 56:
1.31.6 Utilities A. Pursuant to Sec
Page 57 and 58:
Utility Shutdowns A. Utility shutdo
Page 59 and 60:
Deviations: The Submittals shall cl
Page 61 and 62:
miscellaneous items, as included he
Page 63 and 64:
5) The Contractor shall comply with
Page 65 and 66:
1. Sediments or other surface water
Page 67 and 68:
Temporary Light, Power, Water, and
Page 69 and 70:
equirements listed and any other re
Page 71 and 72:
unauthorized persons to Airport-res
Page 73 and 74:
C. The Contractor shall notify the
Page 75 and 76:
E. All materials, parts, and equipm
Page 77 and 78:
N. See appendix B for typical items
Page 79 and 80:
or other characteristics, including
Page 81 and 82:
Page 83:
GUIDE SPECIFICATIONS INTRODUCTION I
Page 86 and 87:
Guide Specification bolts, and item
Page 88 and 89:
Guide Specification 2. Wall Bracket
Page 90 and 91:
Guide Specification 3.4 METAL BASE
Page 92 and 93:
Guide Specification 1.5 CLOSEOUT SU
Page 94 and 95:
Guide Specification 2.3 ILLUMINATIO
Page 96 and 97:
Guide Specification B. Glass Column
Page 98 and 99:
Guide Specification SECTION 06 40 2
Page 100 and 101:
Guide Specification humidity at lev
Page 102 and 103:
Guide Specification B. Solid-Surfac
Page 104 and 105:
Page 106 and 107:
Guide Specification 1.4 DELIVERY, S
Page 108 and 109:
Guide Specification 7. Exit Device
Page 110 and 111:
Guide Specification a. Three anchor
Page 112 and 113:
Guide Specification hardware. Facto
Page 114 and 115:
Guide Specification 3.2 ADJUSTING A
Page 116 and 117:
Guide Specification 1.3 INFORMATION
Page 118 and 119:
Guide Specification a. Welded Steel
Page 120 and 121:
Guide Specification b. Stud-Wall Ty
Page 122 and 123:
Guide Specification B. Stainless-St
Page 124 and 125:
Guide Specification B. Examine roug
Page 126 and 127:
Guide Specification D. Glazing: Ins
Page 128 and 129:
Guide Specification DOOR HARDWARE 0
Page 130 and 131:
Guide Specification 1.5 COORDINATIO
Page 132 and 133:
Guide Specification 2.2 HINGING MET
Page 134 and 135:
Guide Specification 1. 1100 Series
Page 136 and 137:
Guide Specification B. Size: Furnis
Page 138 and 139:
Guide Specification 1. All modifica
Page 140 and 141:
Page 142 and 143:
Guide Specification a. Diameter: 1/
Page 144 and 145:
Guide Specification NOTE: On the dr
Page 146 and 147:
Guide Specification 3.5 INSTALLING
Page 148 and 149:
GYPSUM BOARD 09 29 00 - 1 Guide Spe
Page 150 and 151:
Guide Specification NOTE: d. On the
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Guide Specification 1. Locate sampl
Page 160 and 161:
Guide Specification 2. Latex Additi
Page 162 and 163:
Guide Specification F. Movement (Ex
Page 164 and 165:
Guide Specification c. Immediately
Page 166 and 167:
Page 168 and 169:
Guide Specification Testing of Vola
Page 170 and 171:
Page 172 and 173:
Guide Specification 1. Build mockup
Page 174 and 175:
Guide Specification D. Control-Join
Page 176 and 177:
Guide Specification B. Installation
Page 178 and 179:
Page 180 and 181:
Guide Specification 1.6 PROTECTION
Page 182 and 183:
Guide Specification 1. Sizes shall
Page 184 and 185:
Guide Specification NOTE: the mix d
Page 186 and 187:
Guide Specification 4. Curing: Allo
Page 188 and 189:
Guide Specification 1. Probe Manufa
Page 190 and 191:
Guide Specification b. Stop Strips:
Page 192 and 193:
Guide Specification thoroughly. App
Page 194 and 195:
Guide Specification 1. Each carpet
Page 196 and 197:
Guide Specification F. Density: Gre
Page 198 and 199:
Guide Specification C. Butt carpet
Page 200 and 201:
Guide Specification 4. Mitered Carp
Page 202 and 203:
Guide Specification 4. Mannington 5
Page 204 and 205:
Guide Specification characteristics
Page 206 and 207:
Guide Specification END OF SECTION
Page 208 and 209:
Guide Specification 4. ICI Paints 5
Page 210 and 211:
Guide Specification 3.3 APPLICATION
Page 212 and 213:
SIGNAGE 10 14 23 - 1 Guide Specific
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
SIGNAGE 10 14 23 - 11 Guide Specifi
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
2.2 CORNER GUARDS A. Surface-Mounte
Page 236 and 237:
2. Provide full height units. Do no
Page 238 and 239:
Guide Specification 1.4 COORDINATIO
Page 240 and 241:
Guide Specification 2. Mounting: Fl
Page 242 and 243:
Guide Specification 2.6 CUSTODIAL A
Page 244 and 245:
Guide Specification 1. Review metho
Page 246 and 247:
Guide Specification B. Cabinet Door
Page 248 and 249:
Page 250 and 251:
Guide Specification 1. Shelf: Same
Page 252 and 253:
Guide Specification 3.3 INSTALLATIO
Page 254 and 255:
Guide Specification 1.7 WARRANTY A.
Page 256 and 257:
Page 258 and 259:
Guide Specification H. Shade Cloth
Page 260 and 261:
Guide Specification 4. The braking
Page 262 and 263:
Guide Specification d. Multiple "su
Page 264 and 265:
Page 266 and 267:
Guide Specification c. Single-phase
Page 268 and 269:
Guide Specification a. Clear, plumb
Page 270 and 271:
Guide Specification j. Single phase
Page 272 and 273:
Guide Specification 3. All electric
Page 274 and 275:
Guide Specification when copies of
Page 276 and 277:
Guide Specification 15) Safeties: C
Page 278 and 279:
Guide Specification safety devices
Page 280 and 281:
Guide Specification LAWA. This serv
Page 282 and 283:
Guide Specification 1) Replace: Rep
Page 284 and 285:
Guide Specification 2.1 MATERIALS A
Page 286 and 287:
Guide Specification A. General: On
Page 288 and 289:
Page 290 and 291:
Guide Specification 2. Samples shal
Page 292 and 293:
Guide Specification 1.5 DELIVERY, S
Page 294 and 295:
Guide Specification B. Optional Sec
Page 296 and 297:
Guide Specification L. Baked Enamel
Page 298 and 299:
Guide Specification Car and Hoistwa
Page 300 and 301:
Guide Specification C. Door Control
Page 302 and 303:
Guide Specification O. Terminal Lim
Page 304 and 305:
Guide Specification 2. Include as a
Page 306 and 307:
Guide Specification d. Elevator dep
Page 308 and 309:
Guide Specification 3. Protect car
Page 310 and 311:
Guide Specification a minimum dimen
Page 312 and 313:
Guide Specification F. Hall Lantern
Page 314 and 315:
Guide Specification seconds. Upon e
Page 316 and 317:
Guide Specification 9. All cabinets
Page 318 and 319:
Guide Specification C. Re-Inspectio
Page 320 and 321:
Guide Specification D. Step/Skirt P
Page 322 and 323:
Guide Specification K. Operation an
Page 324 and 325:
Guide Specification A. Installer Qu
Page 326 and 327:
Guide Specification 2.2 MATERIALS A
Page 328 and 329:
Guide Specification 3. Brake Operat
Page 330 and 331:
Guide Specification a. The motor co
Page 332 and 333:
Guide Specification 5. Step Tracks:
Page 334 and 335:
Guide Specification ends. Plates sh
Page 336 and 337:
Guide Specification building change
Page 338 and 339:
Guide Specification 35) Pit high wa
Page 340 and 341:
Guide Specification 3.4 DEMONSTRATI
Page 342 and 343:
Guide Specification 1.4 QUALITY ASS
Page 344 and 345:
Guide Specification a. Tools may be
Page 346 and 347:
Guide Specification 1.6 JOB CONDITI
Page 348 and 349:
Guide Specification C. Oil Drip Pan
Page 350 and 351:
Guide Specification G. Landing Floo
Page 352 and 353:
Guide Specification 1. Provide each
Page 354 and 355:
Guide Specification 1. Per Referenc
Page 356 and 357:
Guide Specification 1. Emergency St
Page 358 and 359:
Guide Specification F. Width: 56" (
Page 360 and 361:
Guide Specification PART 2 - PRODUC
Page 362 and 363:
Guide Specification PART 3 - EXECUT
Page 364 and 365:
Page 366 and 367:
Guide Specification 4. Joint: As sp
Page 368 and 369:
Guide Specification 3.2 MANUFACTURE
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Guide Specification 2.2 PIPING SPEC
Page 376 and 377:
Page 378 and 379:
Guide Specification 1. Type: Standa
Page 380 and 381:
Page 382 and 383:
2.4 VALVES Guide Specification a. M
Page 384 and 385:
Guide Specification B. Manual Relea
Page 386 and 387:
Guide Specification 3.3 CLEAN-AGENT
Page 388 and 389:
Guide Specification 1.3 SUBMITTALS
Page 390 and 391:
Guide Specification C. 2-1/2 inches
Page 392 and 393:
Guide Specification 2.5 BUTTERFLY V
Page 394 and 395:
Guide Specification 3.3 GENERAL REQ
Page 396 and 397:
Page 398 and 399:
Guide Specification 1. Hangers for
Page 400 and 401:
Guide Specification 2.9 FIRESTOPPIN
Page 402 and 403:
Guide Specification 2.13 PIPE POSIT
Page 404 and 405:
Guide Specification 20. Pipe Roll a
Page 406 and 407:
Guide Specification auxiliary stops
Page 408 and 409:
Guide Specification d. NPS 8 to NPS
Page 410 and 411:
Guide Specification N. Spring suppo
Page 412 and 413:
Page 414 and 415:
Guide Specification 1. Mass: Minimu
Page 416 and 417:
Guide Specification a. 0.750 inch m
Page 418 and 419:
Guide Specification 2.5 SEISMIC RES
Page 420 and 421:
Guide Specification D. Install spri
Page 422 and 423:
Guide Specification H. Drilled-in A
Page 424 and 425:
Page 426 and 427:
2.3 STENCILS Guide Specification c.
Page 428 and 429:
Guide Specification B. Valve Lockou
Page 430 and 431:
Guide Specification 2. Near each br
Page 432 and 433:
Page 434 and 435:
Guide Specification C. Mockups: Bef
Page 436 and 437:
Guide Specification H. TYPE P-8: AS
Page 438 and 439:
Guide Specification E. Closed Cell
Page 440 and 441:
Guide Specification D. Mineral Fibe
Page 442 and 443:
Guide Specification 3. Service Temp
Page 444 and 445:
Guide Specification C. Woven Polyes
Page 446 and 447:
Guide Specification C. Stainless-St
Page 448 and 449:
Guide Specification N. Heat Traced
Page 450 and 451:
Guide Specification PIPING SYSTEM D
Page 452 and 453:
Page 454 and 455:
Guide Specification 1. Mechanical-J
Page 456 and 457:
Guide Specification B. Remote Regis
Page 458 and 459:
Guide Specification 3. Stem: Copper
Page 460 and 461:
Guide Specification a. Watts. b. Zu
Page 462 and 463:
Guide Specification C. Refrigerator
Page 464 and 465:
Guide Specification 3. Refrigerator
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Guide Specification 2.3 SANITARY SE
Page 472 and 473:
Guide Specification 1. Copper Pipin
Page 474 and 475:
Guide Specification 13. Type, for E
Page 476 and 477:
Guide Specification B. Cast Iron: A
Page 478 and 479:
Guide Specification 1. Structural D
Page 480 and 481:
Guide Specification D. Keep open en
Page 482 and 483:
Guide Specification sanitary sewer
Page 484 and 485:
Guide Specification 7. NPS 6: 12 fe
Page 486 and 487:
Guide Specification Q. Install expa
Page 488 and 489:
Page 490 and 491:
Guide Specification B. Manufacturer
Page 492 and 493:
Guide Specification B. Ductile-Iron
Page 494 and 495:
Guide Specification 2.6 STORM WATER
Page 496 and 497:
Guide Specification C. Area Drain (
Page 498 and 499:
Guide Specification C. Cover shall
Page 500 and 501:
Guide Specification 1. Power failur
Page 502 and 503:
Guide Specification 1. Galvanized s
Page 504 and 505:
Guide Specification 3. Multiple, St
Page 506 and 507:
Guide Specification 1. Lead Sheets:
Page 508 and 509:
Page 510 and 511:
Guide Specification b. Everpure, In
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Guide Specification 1. Rheem. 2. A.
Page 518 and 519:
Guide Specification a. Thermometer
Page 520 and 521: Guide Specification E. Shop Drawing
Page 522 and 523: Guide Specification a. J.R. Smith.
Page 524 and 525: Guide Specification 1. Sloan. 2. Ch
Page 526 and 527: Guide Specification pitched to drai
Page 528 and 529: 2.9 MOP SINKS Guide Specification A
Page 530 and 531: Guide Specification I. Install wate
Page 532 and 533: Guide Specification SECTION 22 70 0
Page 534 and 535: Guide Specification PART 2 - PRODUC
Page 536 and 537: Guide Specification B. Product Desc
Page 538 and 539: Guide Specification B. Manufacturer
Page 540 and 541: Guide Specification 6. Ends: Thread
Page 542 and 543: Guide Specification D. Gas safety s
Page 544 and 545: Guide Specification E. One-Piece, S
Page 546 and 547: Guide Specification C. Install gas
Page 548 and 549: Guide Specification e. Piping in Eq
Page 550 and 551: Guide Specification B. Install hang
Page 552 and 553: Guide Specification C. Source Quali
Page 554 and 555: Guide Specification h. Insert 2 cop
Page 556 and 557: Guide Specification D. Access to Eq
Page 558 and 559: Guide Specification and frames shal
Page 560 and 561: Guide Specification 4. Purge all ai
Page 562 and 563: Guide Specification B. Product Data
Page 564 and 565: Guide Specification 2.3 ACCESSORIES
Page 568 and 569: Guide Specification 1. Manufacturer
Page 574 and 575: Guide Specification D. Design Data:
Page 576 and 577: Guide Specification C. Low-Type, Si
Page 578 and 579: Guide Specification 2.11 FIRESTOPPI
Page 580 and 581: Guide Specification C. Construct su
Page 584 and 585: Guide Specification C. Restrained S
Page 586 and 587: Guide Specification 2.3 DUCTWORK LA
Page 588 and 589: Guide Specification 3. Wedge Anchor
Page 592 and 593: Guide Specification 2. Brady. 3. Ko
Page 594 and 595: Guide Specification 3.2 INSTALLATIO
Page 596 and 597: Guide Specification drawings with a
Page 598 and 599: Guide Specification B. Permanently
Page 600 and 601: Guide Specification D. Measure, adj
Page 602 and 603: Guide Specification c. Size/model d
Page 604 and 605: Guide Specification k. Discharge pr
Page 606 and 607: Guide Specification h. Minimum desi
Page 608 and 609: Guide Specification 18. ASTM C1136
Page 610 and 611: Guide Specification H. TYPE P-8: AS
Page 612 and 613: Guide Specification 2. Density: 1.5
Page 614 and 615: Guide Specification b. Pittsburgh C
Page 616 and 617: Guide Specification 1. Insulate ent
Page 618 and 619: Guide Specification P. Prepare pipe
Page 620 and 621:
Guide Specification G. Equipment in
Page 622 and 623:
Guide Specification Transfer Air Du
Page 624 and 625:
Page 626 and 627:
Guide Specification 1.7 COMMISSIONI
Page 628 and 629:
Guide Specification 2. Piping syste
Page 630 and 631:
Guide Specification 1. Test heating
Page 632 and 633:
Guide Specification 4. System confi
Page 634 and 635:
Guide Specification 2.2 OPERATOR WO
Page 636 and 637:
Guide Specification 6. Record, eval
Page 638 and 639:
Guide Specification 5. Add, delete,
Page 640 and 641:
Guide Specification 6. Data reports
Page 642 and 643:
Guide Specification a. Start. b. Op
Page 644 and 645:
Guide Specification 2. Base on occu
Page 646 and 647:
Guide Specification 1. Calculate ou
Page 648 and 649:
Page 650 and 651:
Guide Specification 1.3 SYSTEM DESC
Page 652 and 653:
Guide Specification 1. Fittings: AS
Page 654 and 655:
Guide Specification D. Sleeve pipe
Page 656 and 657:
Guide Specification PIPE SIZE Inche
Page 658 and 659:
Guide Specification B. Type: Horizo
Page 660 and 661:
Page 662 and 663:
Guide Specification B. Line Test Pr
Page 664 and 665:
Guide Specification 2.4 REFRIGERANT
Page 666 and 667:
Guide Specification 3. Sporlan Valv
Page 668 and 669:
Guide Specification B. Internal Dia
Page 670 and 671:
Guide Specification 2. When receive
Page 672 and 673:
Page 674 and 675:
Guide Specification 1. Water meters
Page 676 and 677:
Guide Specification 5. High or low
Page 678 and 679:
Guide Specification C. Provide glyc
Page 680 and 681:
Guide Specification source and allo
Page 682 and 683:
Guide Specification Metal and Flexi
Page 684 and 685:
Guide Specification 3. AWS D9.1M/D9
Page 686 and 687:
Guide Specification 1. Ducts up to
Page 688 and 689:
Guide Specification 7. Maximum Stat
Page 690 and 691:
Guide Specification D. Unless other
Page 692 and 693:
Guide Specification 8. Unconditione
Page 694 and 695:
3.9 PAINTING Guide Specification A.
Page 696 and 697:
3.12 START UP Guide Specification 2
Page 698 and 699:
Guide Specification a. Pressure Cla
Page 700 and 701:
Guide Specification a. Rectangular
Page 702 and 703:
Guide Specification 2. UL 555C - St
Page 704 and 705:
Guide Specification 9. 90-degree st
Page 706 and 707:
Guide Specification B. Fabrication:
Page 708 and 709:
Guide Specification 3. Operator: Mi
Page 710 and 711:
Guide Specification F. Bearings: 1.
Page 712 and 713:
Guide Specification h. Upstream and
Page 714 and 715:
Guide Specification 3.2 NSTALLATION
Page 716 and 717:
Page 718 and 719:
Guide Specification C. Sheaves: Cas
Page 720 and 721:
Page 722 and 723:
Guide Specification H. Hot Water He
Page 724 and 725:
Page 726 and 727:
Guide Specification 2.5 CEILING SUP
Page 728 and 729:
Guide Specification D. Fabrication:
Page 730 and 731:
Page 732 and 733:
Guide Specification C. Media: UL 90
Page 734 and 735:
Guide Specification 9. An integral
Page 736 and 737:
Guide Specification 1.4 WARRANTY in
Page 738 and 739:
Page 740 and 741:
Page 742 and 743:
Guide Specification B. Coil Guard:
Page 744 and 745:
Guide Specification C. Install the
Page 746 and 747:
Guide Specification E. If chiller a
Page 748 and 749:
Page 750 and 751:
Guide Specification 1.4 WARRANTY c.
Page 752 and 753:
Guide Specification motor and motor
Page 754 and 755:
Guide Specification 1. Type: R-134a
Page 756 and 757:
Guide Specification C. Designed to
Page 758 and 759:
Guide Specification C. Enclosure: U
Page 760 and 761:
Guide Specification 12. Total power
Page 762 and 763:
Guide Specification E. Manually Res
Page 764 and 765:
Guide Specification sagging. D. Too
Page 766 and 767:
Guide Specification mechanical coup
Page 768 and 769:
Guide Specification 3.7 COMMISSIONI
Page 770 and 771:
Page 772 and 773:
Guide Specification 7. Fan airflow,
Page 774 and 775:
Guide Specification 1. Material: St
Page 776 and 777:
Guide Specification GUARANTEED MINI
Page 778 and 779:
Guide Specification 4. Handrail: St
Page 780 and 781:
Guide Specification h. Verify prope
Page 782 and 783:
Guide Specification 1. NEMA MG 1 -
Page 784 and 785:
Guide Specification 1. Zinc chromat
Page 786 and 787:
2.5 COILS Guide Specification A. Ca
Page 788 and 789:
Guide Specification d. Axles: Minim
Page 790 and 791:
Guide Specification Method for Test
Page 792 and 793:
Page 794 and 795:
Guide Specification 4. Rough-in con
Page 796 and 797:
Guide Specification K. Air Filters:
Page 798 and 799:
Page 800 and 801:
Guide Specification f. National Fir
Page 802 and 803:
Guide Specification 32. Resistive L
Page 804 and 805:
Guide Specification 1.6 MAINTENANCE
Page 806 and 807:
Guide Specification deems a critica
Page 808 and 809:
Guide Specification 1. Hubbell. 2.
Page 810 and 811:
Page 812 and 813:
Guide Specification B. Location: In
Page 814 and 815:
Guide Specification B. Inspect cabl
Page 816 and 817:
Guide Specification 3.1 CONDUCTOR A
Page 818 and 819:
Page 820 and 821:
Guide Specification 2.3 TERMINATION
Page 822 and 823:
Page 824 and 825:
Guide Specification 2.1 ROD ELECTRO
Page 826 and 827:
Guide Specification J. Install from
Page 828 and 829:
Guide Specification 1.3 DEFINITIONS
Page 830 and 831:
Guide Specification damage, by stor
Page 832 and 833:
Guide Specification 5. Mechanical F
Page 834 and 835:
Guide Specification spring lock was
Page 836 and 837:
Guide Specification A. Clean adjace
Page 838 and 839:
Guide Specification F. In Slab Abov
Page 840 and 841:
Guide Specification 2. Allied Tube
Page 842 and 843:
Guide Specification 1. Material: Ga
Page 844 and 845:
Guide Specification U. Install suit
Page 846 and 847:
Page 848 and 849:
Guide Specification B. Product Desc
Page 850 and 851:
Page 852 and 853:
Guide Specification 1.6 PROJECT CON
Page 854 and 855:
Guide Specification C. Design and f
Page 856 and 857:
Guide Specification clean surfaces
Page 858 and 859:
Guide Specification with structural
Page 860 and 861:
Guide Specification 3.4 MANHOLE AND
Page 862 and 863:
Page 864 and 865:
Page 866 and 867:
Guide Specification D. Holes for Ex
Page 868 and 869:
Page 870 and 871:
Guide Specification voltage between
Page 872 and 873:
Guide Specification locations. 6. I
Page 874 and 875:
Guide Specification 1.2 REFERENCES
Page 876 and 877:
Page 878 and 879:
Page 880 and 881:
Guide Specification B. Arc fault ha
Page 882 and 883:
Guide Specification description of
Page 884 and 885:
Guide Specification equipment for t
Page 886 and 887:
Page 888 and 889:
Guide Specification and type of swi
Page 890 and 891:
Guide Specification 1. Cover Mounte
Page 892 and 893:
Guide Specification 2. Separate tri
Page 894 and 895:
Page 896 and 897:
Guide Specification D. Provide 2 ex
Page 898 and 899:
Guide Specification 5. The DTC shal
Page 900 and 901:
Guide Specification 3.2 DOCUMENTATI
Page 902 and 903:
Page 904 and 905:
Guide Specification the installatio
Page 906 and 907:
Guide Specification Maximum Voltage
Page 908 and 909:
Guide Specification F. Each breaker
Page 910 and 911:
Guide Specification u. Demand and P
Page 912 and 913:
Guide Specification B. Voltage and
Page 914 and 915:
Guide Specification a. Safety: UL 6
Page 916 and 917:
Guide Specification b. Waveforms sh
Page 918 and 919:
Guide Specification a. Eight (8) di
Page 920 and 921:
Guide Specification A. The switchge
Page 922 and 923:
Guide Specification ANSI standards.
Page 924 and 925:
Page 926 and 927:
Guide Specification I. Basic Impuls
Page 928 and 929:
Guide Specification B. Use flexible
Page 930 and 931:
Guide Specification 10. Cable termi
Page 932 and 933:
Page 934 and 935:
2.4 BUS Guide Specification H. An i
Page 936 and 937:
Guide Specification control circuit
Page 938 and 939:
Guide Specification for remote sett
Page 940 and 941:
Guide Specification 2.10 ENCLOSURES
Page 942 and 943:
Guide Specification B. The training
Page 944 and 945:
Guide Specification B. Product Data
Page 946 and 947:
Guide Specification 2.2 MOLDED CASE
Page 948 and 949:
Guide Specification C. Allow witnes
Page 950 and 951:
Page 952 and 953:
Page 954 and 955:
Guide Specification C. Submit dimen
Page 956 and 957:
Page 958 and 959:
Page 960 and 961:
Guide Specification 1.4 CLOSEOUT SU
Page 962 and 963:
Guide Specification 3.2 FIELD QUALI
Page 964 and 965:
Guide Specification 2.1 HINGED COVE
Page 966 and 967:
Page 968 and 969:
Guide Specification C. Configuratio
Page 970 and 971:
Guide Specification 3.7 CLEANING A.
Page 972 and 973:
Guide Specification A. Manufacturer
Page 974 and 975:
Guide Specification A. Manufacturer
Page 976 and 977:
Page 978 and 979:
Page 980 and 981:
Guide Specification A. Project Reco
Page 982 and 983:
Guide Specification protected by ar
Page 984 and 985:
Guide Specification E. Sequence of
Page 986 and 987:
Guide Specification switch is in no
Page 988 and 989:
Guide Specification 2.3 SOURCE QUAL
Page 990 and 991:
Page 992 and 993:
Guide Specification 4. Pushbuttons:
Page 994 and 995:
Page 996 and 997:
Page 998 and 999:
Guide Specification complete contro
Page 1000 and 1001:
Guide Specification in accordance w
Page 1002 and 1003:
Guide Specification 2.10 RADIATOR M
Page 1004 and 1005:
Guide Specification connecting to t
Page 1006 and 1007:
Page 1008 and 1009:
Page 1010 and 1011:
Guide Specification B. Design Requi
Page 1012 and 1013:
Page 1014 and 1015:
Guide Specification 1. Wiring pract
Page 1016 and 1017:
Guide Specification C. Inverter 7.
Page 1018 and 1019:
Guide Specification (3) DC Under vo
Page 1020 and 1021:
Guide Specification 5. Controls (2)
Page 1022 and 1023:
Guide Specification 2. Isolation a.
Page 1024 and 1025:
Guide Specification a. Eight sets o
Page 1026 and 1027:
Page 1028 and 1029:
Page 1030 and 1031:
Guide Specification and the followi
Page 1032 and 1033:
Guide Specification 3. Neutral to G
Page 1034 and 1035:
Page 1036 and 1037:
Guide Specification 1.11 WARRANTIES
Page 1038 and 1039:
Guide Specification 1. Philips. 2.
Page 1040 and 1041:
Page 1042 and 1043:
Guide Specification G. Submit all f
Page 1044 and 1045:
Guide Specification 14. ANSI/TIA/EI
Page 1046 and 1047:
Guide Specification 7. The listing
Page 1048 and 1049:
Guide Specification H. The Contract
Page 1050 and 1051:
Guide Specification B. Provide 4-po
Page 1052 and 1053:
Guide Specification D. Acceptable M
Page 1054 and 1055:
Guide Specification Baggage Handlin
Page 1056 and 1057:
Guide Specification 3.2 PHASES OF I
Page 1058 and 1059:
Guide Specification 3.7 SYSTEM STAR
Page 1060 and 1061:
H. I. J. K. L. M. Guide Specificati
Page 1062 and 1063:
Guide Specification 3.13 COMPUTERIZ
Page 1064 and 1065:
Guide Specification 1.3 MATERIALS O
Page 1066 and 1067:
Guide Specification E. Storage or s
Page 1068 and 1069:
Guide Specification F. Existing Ite
Page 1070 and 1071:
Guide Specification C. Refrigerant:
Page 1072 and 1073:
Page 1074 and 1075:
Guide Specification F. Post changes
Page 1076 and 1077:
Guide Specification 1.7 EQUIPMENT C
Page 1078 and 1079:
Guide Specification Contractor is r
Page 1080 and 1081:
Page 1082 and 1083:
Guide Specification O. Spare condui
Page 1084 and 1085:
Guide Specification 3.6 COMPUTERIZE
Page 1086 and 1087:
Guide Specification O. NEMA Nationa
Page 1088 and 1089:
Guide Specification 5. ANSI/TIA/EIA
Page 1090 and 1091:
Guide Specification D. Major items
Page 1092 and 1093:
Guide Specification 2. The system s
Page 1094 and 1095:
Guide Specification 7. Web-Based/Cl
Page 1096 and 1097:
Page 1098 and 1099:
Guide Specification B. Upon concurr
Page 1100 and 1101:
Guide Specification 7. Termination
Page 1102 and 1103:
Guide Specification 1) After conclu
Page 1104 and 1105:
Guide Specification C. All indoor c
Page 1106 and 1107:
Page 1108 and 1109:
Guide Specification PAGING SYSTEMS
Page 1110 and 1111:
Guide Specification C. System insta
Page 1112 and 1113:
Guide Specification H. All audio sw
Page 1114 and 1115:
Guide Specification 1. The PDRP sys
Page 1116 and 1117:
Guide Specification S. Monitor/test
Page 1118 and 1119:
Page 1120 and 1121:
Page 1122 and 1123:
Guide Specification warranty period
Page 1124 and 1125:
Guide Specification 5. Intelligibil
Page 1126 and 1127:
Guide Specification Custom software
Page 1128 and 1129:
Guide Specification Fire Stop Syste
Page 1130 and 1131:
Guide Specification 1. On-Site Perf
Page 1132 and 1133:
Guide Specification D. Endurance Te
Page 1134 and 1135:
Page 1136 and 1137:
Guide Specification 5. Absence of g
Page 1138 and 1139:
Guide Specification 3. Freedom From
Page 1140 and 1141:
Guide Specification inspection, LAW
Page 1142 and 1143:
Guide Specification security contra
Page 1144 and 1145:
Guide Specification 1. Provide shop
Page 1146 and 1147:
Guide Specification 10. Record draw
Page 1148 and 1149:
Guide Specification 6. 49 CFR 1520
Page 1150 and 1151:
Guide Specification 5. Where applic
Page 1152 and 1153:
Guide Specification Contractor is r
Page 1154 and 1155:
Guide Specification 2. GE DOR model
Page 1156 and 1157:
Guide Specification a. Cooper Notif
Page 1158 and 1159:
Page 1160 and 1161:
Guide Specification a. Floors - thr
Page 1162 and 1163:
Guide Specification 5. All equipmen
Page 1164 and 1165:
Guide Specification 3.5 INSPECTIONS
Page 1166 and 1167:
Guide Specification 7. The test pro
Page 1168 and 1169:
Guide Specification c. Receipt of w
Page 1170 and 1171:
Guide Specification 2. The Contract
Page 1172 and 1173:
Guide Specification inspection, LAW
Page 1174 and 1175:
Guide Specification camera cannot b
Page 1176 and 1177:
Guide Specification G. Installation
Page 1178 and 1179:
Guide Specification 1. In addition
Page 1180 and 1181:
Guide Specification 9. 49 CFR 1544
Page 1182 and 1183:
Guide Specification B. Manufacturer
Page 1184 and 1185:
Guide Specification K. Following ea
Page 1186 and 1187:
Guide Specification c. CIF d. QCIF
Page 1188 and 1189:
Guide Specification 14. Dome: Dome
Page 1190 and 1191:
Guide Specification 5. Frame Rate s
Page 1192 and 1193:
Guide Specification H. Wire and Cab
Page 1194 and 1195:
Guide Specification E. The Contract
Page 1196 and 1197:
Guide Specification suggested means
Page 1198 and 1199:
Guide Specification 3.4 IDENTIFICAT
Page 1200 and 1201:
Guide Specification C. In addition
Page 1202 and 1203:
Guide Specification 7. Termination
Page 1204 and 1205:
Guide Specification VIDEO SURVEILLA
Page 1206 and 1207:
Guide Specification b. An operation
Page 1208 and 1209:
Guide Specification 14. State of Ca
Page 1210 and 1211:
Guide Specification 2. Initiating D
Page 1212 and 1213:
Guide Specification 3) Occupied Roo
Page 1214 and 1215:
Guide Specification B. Elevator Lob
Page 1216 and 1217:
Guide Specification 1. The point-to
Page 1218 and 1219:
Guide Specification panel, a separa
Page 1220 and 1221:
Guide Specification 1. The fire ala
Page 1222 and 1223:
Guide Specification 3. In the event
Page 1224 and 1225:
Guide Specification 2. Network alph
Page 1226 and 1227:
Guide Specification program control
Page 1228 and 1229:
Guide Specification 2. The percent
Page 1230 and 1231:
Guide Specification 3. The module s
Page 1232 and 1233:
Guide Specification and to insure t
Page 1234 and 1235:
Guide Specification 8. It shall be
Page 1236 and 1237:
Guide Specification 3. All non-addr
Page 1238 and 1239:
Guide Specification I. End of Line
Page 1240 and 1241:
Norman Y. Mineta San José Internat
Page 1242 and 1243:
Page 1244 and 1245:
Page 1246 and 1247:
Page 1248 and 1249:
Page 1250 and 1251:
Page 1252 and 1253:
Page 1254 and 1255:
Page 1256 and 1257:
Page 1258 and 1259:
Page 1260 and 1261:
Page 1262 and 1263:
Page 1264 and 1265:
Page 1266 and 1267:
Page 1268 and 1269:
Page 1270 and 1271:
Page 1272 and 1273:
Page 1274 and 1275:
Page 1276 and 1277:
Page 1278 and 1279:
Page 1280 and 1281:
Page 1 of 10 GENERAL CONDITIONS GC-
Page 1282 and 1283:
specified coverages shall be filed
Page 1284 and 1285:
GC-19. WAIVER 19.01 The waiver by C
Page 1286 and 1287:
Page 7 of 10 other unsuitability to
Page 1288 and 1289:
Page 1 of 10 SPECIAL CONDITIONS SC-
Page 1290 and 1291:
SC-9. OPERATION OF VEHICLES 9.01 Co
Page 1292 and 1293:
14.02 Cleaning of Site: The Contrac
Page 1294 and 1295:
Page 7 of 10 7. Annual clean down o
Page 1296 and 1297:
SC-19. REPORTS 19.01 Unless specifi
show all

Design and Construction Handbook - Los Angeles World Airports

Create successful ePaper yourself

Delete template?

Save as template?