Design and Construction Handbook - Los Angeles World Airports

SIGNAGE
10 14 23 - 4
Guide Specification
NOTE: This signage shop drawing submittal shall include all required power and data
requirements and circuiting configurations and have this information coordinated with the
corresponding electrical drawings. All illuminated signs within a tenant's lease area shall be
circuited to the Tenant's electrical panel board.
1.5 PERMITS BY SIGNAGE CONTRACTOR
A. Signage Contractor shall make all submittals for each permit to LAWA. Signage Contractor
shall be responsible for paying all fees, making adjustments as required, or any task necessary
for obtaining local building and installation Sign permits for the proper execution of the Work.
1.6 QUALITY ASSURANCE
A. Mock-ups and Prototypes:
1. Provide a mock-up (partial for large Signs; complete for smaller Signs) of each sign type
requested at the fabrication facility for review.
2. Utilize the same materials and installation methods in the mock-up as intended for the
final Work. Schedule the installation so that the mock-up may be examined, and any
necessary adjustments made, prior to commencing fabrication of the final Work. Replace
unsatisfactory items as directed.
3. When accepted, mock-up shall serve as the standard for materials, workmanship, and
appearance for the Work throughout the project.
B. Work-In-Progress Approvals:
1. Provide work-in-progress sign elements reviews. Scheduled or unscheduled viewings at
the Fabrication Facility may be initiated by LAWA as deemed necessary to ensure
continued quality control and make any adjustments required during fabrication.
Unsatisfactory items are to be corrected by the Signage Contractor as directed by LAWA.
C. Regulatory Requirements:
1. Comply with applicable requirements of the Applicable Laws and Authorities. Obtain
necessary approvals and permits from all such Authorities as required.
D. Markings and Labels:
1. Locate markings, labels, manufacturer names and other identifications so as to be
concealed from public view and as acceptable by LAWA.
2. No trade name or other identification shall appear on any item where it will be seen by
the public except as specifically approved by LAWA in advance.
E. Final Location of Signs:
Wayfinding and Signage