07.09.2014 Views

1996 Swinburne Higher Education Handbook

1996 Swinburne Higher Education Handbook

1996 Swinburne Higher Education Handbook

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

EE598 Digital Systems and Control<br />

5 credit points 2 hours per week Hawthorn<br />

Prerequisites: EE489, SM494 Corequisites: nil<br />

Assessment: examination/assignment<br />

A final year subject in all stream of the degree of Bachelor of<br />

Engineering (Electrical)<br />

Objectives<br />

To consolidate the work on systems and control in earlier<br />

years by introducing sampling and discrete data in feedback<br />

systems, the principles of process control and techniques of<br />

computer based control including interfacing and data<br />

acquisition.<br />

Content<br />

Design of control systems to meet a set of specifications.<br />

Classical methods of lead-lag networks and PID controllers<br />

from root locus and frequency domain approach.<br />

Commercial packages and PLC's.<br />

Algorithms suitable for compensation using computer based<br />

control systems.<br />

State variable feedback and design of continuous and discrete<br />

time multivariable control systems to meet a set of<br />

specifications.<br />

Advanced topics of adaptive control and optimisation.<br />

Recommended reading<br />

Chase, F. Diagram Sets in Process Control and Computn<br />

Interfacing. 1989<br />

Franklin, G.F., Powell, J.D. and Workman, M.L. Digital Control<br />

of Dynamic Systems. 2nd edn, Reading, Mass., Addison-Wesley,<br />

1990<br />

Kuo, B. Digital Control Systems. Holt, New York, Rinehart and<br />

Winston, 1980<br />

Shinskey, F. Process Control Systems Application Design and<br />

Tuning. 3rd edn, New York, McGraw-Hill, 1988<br />

EE710 Communications Principles<br />

12.5 credit points 4 hours per week average Hawthorn<br />

Prerequisites: must satisfj course entry requirements<br />

Corequisites: nil Assessment: exam, assignment and<br />

laboratory work.<br />

A subject in the Master of Engineering by coursework<br />

(Telecommunications and Computer Systems Engineering)<br />

0 bjectives<br />

To develop an understanding of basic communications<br />

principles and techniques.<br />

Content<br />

Electrical/electromagnetic elements of communication;<br />

spectrum, bandwidth, filtering and noise concepts;<br />

spectral analysis, time and frequency domains;<br />

signal transmission: transfer functions, amplitude and<br />

phase response, ideal and practical filter response, energy<br />

and power spectra;<br />

signal modulation principles: amplitude, phase,<br />

frequency, hybrid. Digital modulation basics;<br />

noise effects in modulation systems, detection<br />

performance.<br />

Recommended reading:<br />

Haykin, S., An Introduction to Analogue and Digital<br />

Communications. N.Y., Wiley, 1989<br />

Stanley, W.D., Electronic Communications Systems. Reston, VA,<br />

Reston Pub. Co. 1982<br />

Tomasi, W., Fundamentals of Electronic Communications Systems.<br />

Englewood Cliffs, N.J., Prentice Hall, 1988<br />

Ziemer, R.E. and Tranter W.H., Principles of Communications.<br />

3rd edn, Boston, Houghton Mifflin, 1990<br />

EE714 Digital Electronics Techniques<br />

12. fi credit points 4 hours per week average Hawthorn<br />

Prerequisites: must satisfj course entry requirements<br />

Corequisites: nil Assessment: exam, assignment and<br />

laboratory<br />

A subject in the Masters of Engineering by coursework<br />

(Telecommunications, Computer Systems Engineering and<br />

Biomedical Instrumentation)<br />

Objectives<br />

To provide an introduction to the operation, analysis and<br />

design of digital electronic systems<br />

Content<br />

Boolean algebra (axioms and theorems, and their<br />

application);<br />

combinational logic (gates level, SOP and POS,<br />

canonical forms);<br />

SS1 and MS1 functional blocks (multiplexers, encoders);<br />

sequential logic; flip-flops and latches, MS1 registers and<br />

counters;<br />

synthesis of systems controllers using finite state<br />

machines and ASMs;<br />

Programmable Logic Devices (ROMS, EPLDs).<br />

~ecimmended reading<br />

Katz, R.H., Contemporary Logic Dengn, Benjamin/Cummings. 1994<br />

Mano, M., Digital Design. 2nd edn, Englewood Cliffs, N.J.<br />

Prentice Hall International, 1991<br />

EE720 Transmission Systems<br />

12.5 credit points 4 hours per week average Hawthorn<br />

Prerequisites: must satisfj course entry requirements<br />

Corequisites: nil Assessment: exam, assignment and<br />

laboratory work<br />

A subject in the Master of Engineering by coursework<br />

(Telecommunications and Computer Systems Engineering)<br />

Objectives<br />

To develop an understanding of basic cornmunitation<br />

systems transmission techniques and their characteristics.<br />

e<br />

Content<br />

Transmission lines;<br />

antennas;<br />

radio wave propagation;<br />

microwave waveguide propagation;<br />

satellites;<br />

fibre Optics;<br />

basic telephone circuits.<br />

Recommended reading<br />

Duncan, F.R., Electronic Communications Systems, N.Y., Delmar<br />

Publishers Inc., 1987

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!