NATIONAL ALUMINIUM COMPANY LIMITED - Rites

(v.) After final acceptance of individual equipment / system bby
y the Employer, the
Contractor will update all original drawings and documents for the equipment / system
to “as built” conditions.
4.8.5 ENGINEERING INFORMATION SUBMISSION SCHEDULE
Prior to the award of Contract, a Detailed Engineering Information Submi Submission Schedule shall
be tied up with the Employer. For this, the Contractor shall furnish a detailed list of
engineering information along with the proposed submission schedule. This list would be a
comprehensive one including all engineering data / drawin drawings gs / information for all bought out
items and manufactured items. The information shall be categorised into the following
parts.
Information that shall be submitted for the approval of the Employer before proceeding
further, and Information that would be submitted for Employer’s information only. The
Engineering Information Schedule shall be updated month wise. The schedule should allow
adequate time for proper review and incorporation of changes/ modifications, if any, to
meet the contract without affect affecting ing the equipment delivery schedule and overall project
schedule. The early submission of drawings and data is as important as the manufacture and
delivery of equipment and hardware and this shall be duly considered while determining the
overall performance e and progress.
4.9 ENGINEERING COORDINATION PROCEDURE
Identification of Principal Engineering Coordinators
4.9.1 The following principal coordinators will be identified by respective organisations at time of
award of contract
RITES’ COORDINATORS
RITES- Engineering Coordinators
Name :
Designation :
Address :
a) Postal :
b) Telegraphic :
TELEX :
FAX : TELEPHONE :
EMPLOYER’S COORDINATORS
NALCO- Engineering Coordinators (NALCO EC)
Name :
Designation :
Address :
a) Postal :
b) Telegraphic :
TELEX :
Technical Specifications: Sec-5,General Techn chnical Requirements
Page 8 of 27