NATIONAL ALUMINIUM COMPANY LIMITED - Rites

1.1. GENERAL
Technical Specification: Sec-3,Special 3,Special Stipulation To The Bidders
SECTION 3
(SPECIAL STIPULATIONS TO BIDDERS)
1.1.1 This Technical Specification shall be read in conjunction with Commercial, General Condition
of Contract and other project requirement mentioned in this specification.
1.1.2 The Bidder shall quote for complete scope of work as covered in this specification.
1.1.3 This Technical Specification is for turnkey supply of the plant & equipment and related
structures including execution of structural steel works and civil works as specified in
subsequent chapters, along with necessary modification, as detailed in the Scope of Work
and Technical Specification.
1.1.4 Instructions to Bidders idders / Special Instruction specified in other chapters shall be read in
conjunction with stipulation stated in this chapter.
1.1.5 The Bidder shall submit the drawings / documents, technical data / information as
mentioned in various sections and annexure without which the Bid shall be considered as
incomplete and may not be considered further.
1.1.6 The Bidder shall submit along with the bid a work schedule in the form of a bar chart
indicating the commencement and completion dates of each acti activity vity such as preparation of
design, approval of design & drawings, preparation & approval of fabrication drawings,
procurement of steel and other material, ordering of bought out items, their delivery to
shop, major shop activities like fabrication of stru structures/ ctures/ manufacture of equipment,
assembly, shop testing, inspection, shop painting &&dispatch
to the site, schedule of erection,
final painting after erection at site, testing and commissioning of Plant and Equipment,
without which the bid may not be consi considered.
1.1.7 The Bidder shall clearly indicate the clause wise compliance to the specification. Non
compliance with this and generalized statements like. "The equipment shall be
manufactured as per IS standard / our specification etc" may result in reje rejection of the Bid.
The deviation, if any, shall be clearly specified clause clause-wise wise in the format enclosed with this
technical specification. In absence of deviation indicated, it will be presumed that the Bidder
has no deviations.
1.1.8 One copy of the Tender er document and drawings shall be duly signed by the Bidder as a
token of acceptance of all clauses / parameters / data mentioned therein and returned along
with the Bid without which the Bid is liable to be rejected. In case the Bidder intends to
change any ny data / parameter given in Technical Specifications the same shall be clearly
mentioned in the deviation list, with reasons thereof.
Page 1 of 11