NATIONAL ALUMINIUM COMPANY LIMITED - Rites

1.1.16 The offer shall be complete in all respects and any additional equipment, accessories,
auxiliaries, services, work etc. which are not specifically mentioned in the specification but
are required for smooth and trouble free operation and to achieve performance required to
be guaranteed in terms of the Bid Document, shall be included by the Bidder in the offer.
1.1.17 The make of all bought out items shall be as per” List of preferred makes” of supplies and
equipment mentioned in tender document.
1.1.18 Metric systems & English language shall only be used throughout the Bid and in the
drawings.
1.1.19 The Bidder shall satisfy himself about his ability for completing the work as per the time
schedule before submitting his offer. In case the Bidder is unable to adhere to the schedule
indicated in this specification, the Bidder need not submit their offer against this Bid Bid.
1.1.20 A complete list of exclusions from Bidder's scope of work shall be clearly indicated in the Bid.
1.1.21 In case of any contradiction between Instructions to Bidder and Technical Specifications,
stipulation in the Technical Specification shall prevail.
1.1.22 The Bidder has to carry out the work is such a manner that it does not affect the plant
operations. If other Contractors are also engaged at the same work site for other jobs, the
Bidder shall work in co-ordination ordination with them such that tthe
he work of other Contractor is not
affected. For integration of new facilities & the existing one, shutdowns period in phases, as
per the schedule mutually agreed between “Purchaser” and successful Bidder would be
provided. Hence, Bidder shall indicate in their offer, the stages at which the shut downs are
required and their respective duration.
1.1.23 All parts of equipment requiring replacement or inspection or lubrication shall be so
arranged/ assembled that they are easily accessible without the need of dismantling of other
equipment or structures. All electrical cables shall be so laid that they are not liable to be
damaged and can be easily inspected and maintained and when necessary any damaged
cable can be accessed & replaced individually.
1.1.24 All equipment shall be complete with adequate safety devices wherever a potential hazard
to personnel exists. Provision for safe access of personnel working to and around equipment
for operation and maintenance, shall be provided.
1.1.25 The Bidder shall train the Purchaser’s personnel in all disciplines of the operation &
maintenance of the plant & equipment being provided by them under the contract.
1.1.26 Standardization of components and assemblies shall be carried out to the maximu maximum possible
extent to ensure interchangeability/as well as to minimize inventory levels.
Technical Specification: Sec-3,Special 3,Special Stipulation To The Bidders
Page 3 of 11