NATIONAL ALUMINIUM COMPANY LIMITED - Rites

The LD shall be assessed on the basis of conveyor equipment having the poorest
performance.
9.0 COMMISSIONING (SYSTEM TRIAL OPERATION)
Duration of the trial operation of the he complete equipment shall be 30 continuous days with
available no of loaded rakes during the period or as to be mutually agreed agreed.
10.0 TYPE TESTS AND TYPE TEST CHARGES
10.1 All equipment / systems to be supplied shall conform to type tests as per re relevant standards
and proven type.
10.2 The Bidder / Contractor shall furnish the reports of all the type tests carried out within five
years of the date of bid opening as per specification and relevant standards for all
components / equipments / systems. These reports should be for the tests conducted on
identical / similar components / equipments / systems to those offered / proposed to be
supplied under this contract.
10.3 In case contractor is not able to submit report of type test(s) conducted in last five years, or
in case type test report(s) are not found to be meeting the specification / relevant standard
requirements, then all such tests shall be conducted under this contract by the Contractor
free of cost to Owner, and reports shall be submitted ffor
approval.
10.4 All acceptance and routine tests as per relevant standard and specification shall be carried
out. Charges for these shall be deemed to be included in the bid price.
11.0 SPARES
11.1 GENERAL
The Contractor shall include in his scope of supply all the necessary Mandatory spares, start
up and commissioning spares and recommended spares and indicates these in the relevant
schedules of the Bid Form and Price Schedules. The general requirements pertaining to the
supply of these spares have bbeen
described in the following paras.
11.2 MANDATORY SPARES
11.2.1 The list of mandatory spares considered essential by the Owner Owner/RITES /RITES is included in this
specification. The Bidder shall indicate the prices for each and every item (except for items
not applicable to the Bidders design) in th the e ‘Schedule of mandatory Spares . If the Bidder
fails to comply with the above or fails to quote the price of any spare item, the cost of such
spares shall be deemed to be included in the bid price unless the bidder specifies "not
applicable" for the type of equipment/system offered by hi him. m. However during execution if
such spares are found to be applicable, the Contractor shall supply them without extra cost
to the Owner. The Bidder shall furnish the population per unit of each item in the relevant
Technical Specification Sec-2,:Intent :Intent of Specifications
Page 14 of 17