NATIONAL ALUMINIUM COMPANY LIMITED - Rites

.
44.04 Manufacturer’s Supervision
The Contractor may be required to work under the supervision of the manufacturer’s Engineers,
where the Contractor is not the manufacturer. However, this will not relieve the Contractor of his
responsibility of the correctness of quality of workmanship.
44.05 Engineer’s Supervision
All the works shall be carried out under the direction and to the satisfaction of the Engineer. The
Contractor shall be responsible for the correctness of the positions, levels and dimensions of the
works according to the drawings, notwithstanding that he may have been assisted by the Engineer
in setting out the same.
44.06 Contractor’s Representative
The Contractor shall employ at least one competent representative, whose name or names shall
have previously been communicated in writing to the Engineer by the Contractor for approval to
superintend the erection of the plant and carrying our of the work. The said representative, or if
more than one be employed, one of the representative, shall be present at the site, during working
hours, and any written orders or instructions which the Engineer or his authorized representative
may give to the said representative of the Contractor, shall be deemed to have been given to the
Contractor.
The Engineer shall be at liberty to object to any representative or person employed by the
Contractor in the execution of or otherwise of the work who shall misconduct himself or be
incompetent, or negligent, and Contractor shall remove the person so objected to, upon receipt
from the Engineer or notice in writing requiring him to do so and shall provide; in his place a
competent representative at the Contractor’s expenses. The Contractor’s representatives to be
employed for the purpose of the work at site shall be made available when the Purchaser shall
inform the Contractor in writing to the effect. The services of the Contractor’s representative shall
be made available for such period as the Engineer may require and they shall work at all
reasonable times as may be necessary to complete the work within the period specified in the
Contract.
44.07 Program of work and Progress Reports
The Contractor shall submit at such times as may be required by the Engineer, schedules showing
the program and order in which the Contractor proposes to carry out the work, with dates and
estimated completion times of various parts of the work. Such schedules shall be approved by the
Engineer, prior to starting the erection. Such times shall be binding on the Contractor for purpose
of assessing the penalty as called for under subsequent clause. The Engineer may not allow the
Contractor to start work for non-submission of the time schedule of the erection program.
Tender Documents Commercial (Indigenous) Page 37 of 56