NATIONAL ALUMINIUM COMPANY LIMITED - Rites

1.5 Safety
All equipment shall be complete with approved safety devices wherever a potential hazard
exists and with provision for safe access of personnel to and around equipment for
operational and maintenance enance functions.
The design shall include not only those usually furnished with elements of machinery but also
the additional covers, staircases, ladders, etc which are necessary for safe operation of the
plant. All danger and caution notice boards shal shall l be in Hindi, English and Oriya.
The Contractor must take sufficient care in moving his construction plants and equipment
from one place to another so that those may not cause any damage to the property of the
Purchaser particularly to the overhead and underground cables and other service lines.
When the work is carried out at night or in the obscure day light, adequate arrangements for
flood lighting in the working area shall be made by the Bidde Bidder.
The safely postures/regulations for the prevention of accidents shall be displayed by the
Bidder at appropriate places. Notices and warning signs shall be displayed for all sources of
dangers.
All electrical drives and equipment must be equipped with safety devices. The safety
provisions shall conform to the recognized standards, safety codes and statutory regulations.
All safety measures as required to be adopted as per the statutory regulati regulations and the safety
rules of the plant shall be strictly followed by the Contractor during the execution of the
Contract.
Adequate number of first aid boxes as defined in the State Factory Rules shall be provided and
maintained at all the work sites.
1.6 Coding/Numbering ding/Numbering Scheme
A coding scheme for identifying the drawings, plant and equipment, structures, spares and
shipping documents shall be adopted by the contractor in a sequential manner.
1.7 Contractor's License
The contractor shall possess a valid an and d competent contractor's license of specified voltage
issued by the electrical licensing authorities of the Govt. of Orissa for carrying out electrical
installation work of the type and magnitude covered in this document, in the state of Orissa.
The contractor ctor shall also be required to obtain labour license from Statutory Authority.
Technical Specification:Sec-6, Electrical
Page 3 of 97