25.04.2013 Views

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

7.2.2 Equipment Capacity<br />

Capacity of individual equipment shall be tested separately:<br />

(i) Each Wagon Tippler : 20 tips/hour (Guaranteed)<br />

(ii) Each Apron feeder : 1200 TPH (Guaranteed)<br />

7.2.3 Contractor shall also demonstrate that all intermediate equipments viz. Gates, Dust<br />

suppression, Ventilation System etc. can perform as per specification and design<br />

requirement.<br />

7.2.4 Performance and guarantee requirement of various other equipments have been elaborated<br />

elsewhere.<br />

8.0 PERFORMANCE & GUARANTEE TEST PROCEDURE<br />

In accordance with GTR the plant shall be subjected to performance and Guarantee Tests on<br />

successful completion of trial operations. Further, the performance and Guarantee Tests<br />

shall be conducted as per the guideline procedure indicated elsewhere. However, detailed<br />

procedure shall be submitted by vendor as per the guidelines for Owner Owner/RITES's approval.<br />

The P&G Test procedure shall be submitted by the bidder.<br />

8.1 Liquidated Damages for Shortfall in Performance<br />

Should the results s of the performance and guarantee tests show that the equipments /<br />

system have failed to meet the guaranteed parameters, the Contractor shall carry out<br />

modifications, if considered necessary, within 90 days of the notification by Owner.<br />

If the equipment fails ails to meet the guarantee parameters at the end of the above specified<br />

period of 90 days, Owner may at his discretion, reject the equipment or accept it after<br />

assessing the liquidated damages at rates specified herein, to be payable by the Contractor.<br />

8.2 The following equipments/streams shall be subjected to performance and guarantee test in<br />

line with the specification to prove the performance guarantee for all intermediate<br />

equipment.<br />

Liquidated Damages towards shortfall in guaranteed performance shall be imposed as % of<br />

the order value limiting to 5% against following parameters.<br />

Sl.<br />

No.<br />

Equipment<br />

1 Wagon Tippler<br />

2 Apron Feeder<br />

3 Conveyors (R1 & R2)<br />

Technical Specification Sec-2,:Intent :Intent of Specifications<br />

Guaranteed<br />

parameter<br />

Short fall LD amount to be<br />

imposed<br />

20 Tips /Hour By One tip per hour 1% of order value<br />

By two tips per Hour 2% of order value<br />

Beyond two tips per hour Rejected<br />

1200TPH By 0.5% 1% of order value<br />

By 1.0% 1.5 1.5% of order value<br />

Beyond 1.0% Rejected<br />

1200TPH By 0.5% 1% of order value<br />

By 1.0% 1’5 1’5% of order value<br />

Beyond 1.0% Rejected<br />

Page 13 of 17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!