25.04.2013 Views

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

NATIONAL ALUMINIUM COMPANY LIMITED - Rites

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

All installation procedures shall confirm with the accepted good engineering practi practice and with<br />

all applicable governmental laws, regulations and codes.<br />

(d.) Cleaning<br />

All equipment shall be cleaned of all sand, dirt and other foreign materials immediately after<br />

removal from storage and before the equipment is brought to installation site.<br />

(e.) Equipment Assembly<br />

Equipment installed under these specifications shall be assembled if shipped unassembled.<br />

The equipment shall be dismantled and reassembled as required to perform the installation<br />

and commi ssioning work described in these specifications<br />

specifications.<br />

(f.) Defects<br />

All defects in erection shall be corrected to the satisfaction of the Employer and the Project<br />

Manager. The dismantling and reassembly of Contractor furnished equipment to remove<br />

defective parts, replace parts, or make adjustments shall be inclu included ded as a part of the work<br />

under these specifications. The removal of control and instrument equipment in order to<br />

allow bench calibration, if required, and the re re-installation installation of the said equipment after<br />

calibration shall also be included as a part of the work under these specifications.<br />

45.0 DEVIATIONS DISPOSITIONING:<br />

Any deviation to the contract and employer approved documents shall be properly recorded<br />

in the format prescribed by NALCO. Al the deviations shall be bought to the knowledge of<br />

employer’s representative for suitable dispositioning.<br />

46.0 NON-DESTRUCTIVE DESTRUCTIVE TESTING ( NDT):<br />

The contractor shall record results of NDTs carried out at site in the format acceptable to<br />

employer. All the radiographs & its report duly signed & correlated to the job sh shall be handed<br />

over to the employer. Sensitivity of all the test equipment shall be compatible to the job &<br />

acceptance norms agreed.<br />

47.0 TESTING EQUIPMENT & FACILITIES:<br />

Contractor shall provide the testing equipment and facilities necessary to carry out tests &<br />

inspections.<br />

Technical Specification:Sec-8l<br />

Page 23 of 23

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!