NATIONAL ALUMINIUM COMPANY LIMITED - Rites

7. Brakes complete assembly with lining and springs 1 set.
8. Couplings with complete assembly, pins, bushes, and
nuts
1 set.
9. Hydraulic power Pack with all accessories 1 set.
3.0 Wagon Tippler and Accessories
SL.
NO.
DESCRIPTION
1. Speed Reducers (a)complete gear box assy., (b)oil seal and a)1 set. b) 4 sets
(c) bearing)
c) 2 set of each type and
rating
2. Motor a) Motor including slip ring motor, b)Bearings c) Oil a)1 set. b) 1 sets
seal
c) 1 set of each type and
rating
3. Brakes a) Complete assembly b) Linings and springs 1 set. of each type and rating
4. Couplings with complete assembly, pins, bushes, and nuts 1 set. each type and
rating/sise
5. a) Thyristor /VVVF cards/ Modules a) 1 No. of each type. B) 2
b) Relays
No. of each type and rating
6 (a) Hydraulic Pump with electric motor, coupling, valves
(mounted on pump) etc:
1 Set of each type and size
(b) Hydraulic Motor
1 No. of each type and size
(c) Valves
1 No. of each type and size
(d) O.P. Coolers
1 No.
(e) Filter Elements
10 Nos. of each type
(f)Pressure Switch
1 No. of each type
(g)Temperature Switch
1 No. of each type
7 Bearings (not covered separately) 1 Set of each
type and size
8 Limit Switches
2 Nos. of each type.
9 Cylinder Manifold block with all valves mounted on it 1 Set
10 Hydraulic cylinder with piston 1 Set of each type and size
11 Seals of hydraulic cylinder and pumps etc. 2 Sets of each type
12 Hydraulic hoses
13 Gear box total
14 Gear flexible coupling 1set
15 Rod end bearings with housing 1 set for all four clamps
16 Pressure Switches, Common manifold block complete with
all valves mounted on it, Main Pivot bearing,
17 Pinion support & bearing 1 No each type
18 Pinion
19 Latch (Pinion & rack segment locking device) 1 No.
20 Chain & Sprocket 1 set
5.0 Apron Feeder
Technical Specification:Sec-9,Miscellaneous
QTY.
2 sets
1 set
1 no. each
2 nos
Page 11 of 55