navmc dir 5100.8 marine corps occupational safety and ... - US Navy

MARCOR OSH PROGRAM MANUAL 12007g. Enter all pertinent data into the lockout/tagout log.12006. TEMPORARY REMOVAL OF LOCKOUT DEVICES. In situations inwhich lockout devices must be temporarily removed from theenergy-isolating device, the following sequence of action shallbe followed:1. Clear the machine of tools and materials.2. Ensure all affected workers have been safely positioned orremoved from the area.3. Lockout/tagout devices can then be removed by the authorizedworker who applied the device, except as otherwise authorized byparagraph 12011.4. Energize and proceed with testing, positioning, etc., asrequired.5. De-energize all systems and establish lockout/tagoutmeasures in accordance with this Manual before continuing workon machine or equipment.12007. RESTORING MACHINES OR EQUIPMENT TO NORMAL OPERATION1. When service or maintenance is completed and machine orequipment is ready for normal production operations, check thearea around machines or equipment to ensure personnel are safe.2. After tools are removed from machine or equipment, guardsreinstalled, personnel safely repositioned or removed, andoperating controls verified to be in safe or off position,remove all lockout/tagout devices and notify affected workersand responsible supervisor of their removal. Operate energyisolating devices to restore energy to machine or equipment.3. Complete applicable portions of lockout/tagout log.4. Ensure a signaling system is in place and effective forwarning workers exposed to the unexpected release of energyduring maintenance and servicing operations.12-11