navmc dir 5100.8 marine corps occupational safety and ... - US Navy

7002 MARCOR OSH PROGRAM MANUAL2. Installation Safety Office (ISO). The base, depot, trainingcenter, station or ISO that provides the core safety services asdefined by MCO 5100.29A.3. Installation Safety Manager (ISM). The ISM is responsibleto ensure core safety services are provided. The ISO staff ismanaged by the ISM to best accomplish the ISO mission.4. Unit Safety. The safety personnel at MARFOR, MEF, Division,Wing, Group, Squadron, or Battalion who are assignedresponsibility for the unit safety program and who reportdirectly to the unit commander. These safety personnel willalso follow the appropriate safety chain of command, forexample, the battalion unit safety officer reports to regimentsafety that reports to division safety that reports to MEFsafety that reports to MARFOR safety that reports to CMC (SD).Units having a safety officer shall, at the appropriate level,also coordinate their safety efforts with the ISO.5. Work Center Supervisor. The supervisor at the work center,training facilities, and/or ranges is directly responsible forthe implementation of the safety program within the work center.6. Work Center Safety Representative. The person within thework center, training facilities, and/or ranges who performs thesafety responsibilities for the workplace, e.g., RSO, Line Sgt,etc. The work center supervisor usually appoints this person.Upon assignment or change of this person, notification is madeto the safety chain of command.7003. INSPECTION FREQUENCY1. ISO Inspectionsa. All work centers, training facilities, ranges on theinstallation, including those of tenant commands shall beinspected at least annually by installation safety personnel.Where a tenant command has a full-time safety and occupationalhealth manager, the ISM may accept the tenant's safetyinspections as meeting this requirement under procedurespreviously established in an agreement. Particular attention7-4