navmc dir 5100.8 marine corps occupational safety and ... - US Navy

MARCOR OSH PROGRAM MANUAL 120132. Personnel from other DoD activities performing service ormaintenance on Marine Corps machinery or equipment shall complywith respective activity's Lockout/Tagout Program. Theseinstructions must meet requirements of this Manual and 29 CFR1910.147. The responsible management officials of the outsideactivity and affected work site shall inform each other of theirrespective lockout/tagout programs.3. Commanders will ensure their personnel understand and complywith restrictions and prohibitions of outside activity'sLockout/Tagout Program.12011. SHIFT OR PERSONNEL CHANGES. In case of shift orpersonnel changes, the lockout/tagout coordinator shall briefreplacement personnel and ensure the orderly transfer oflockout/tagout devices between off-going and on-comingauthorized workers. Change of locks or tags shall be done witha face-to-face meeting of off-going and on-coming authorizedworkers with no gap in protection.12012. PERIODIC EVALUATION. The ISM or unit safety officershall evaluate effectiveness of the entire program at leastannually. Any deviation or inadequacies shall be documented andcorrected. NAVMC 11402, Lockout/Tagout Program Evaluation,figure 12-1, shall be used for this evaluation.12013. TRAINING1. Training shall be provided to all authorized and affectedworkers, and other personnel as required by 29 CFR 1910.147.Only lockout/tagout coordinators or authorized workers mayperform lockout/tagout procedures.2. Instructors qualified by the ISM or unit safety officer willconduct training and prepare a record certifying that employeetraining has been accomplished. Training records shall bemaintained IAW chapter 5. Retraining shall be conductedwhenever there is:12-13