navmc dir 5100.8 marine corps occupational safety and ... - US Navy

8003 MARCOR OSH PROGRAM MANUALa. USMC official or contractor official shall immediatelynotify the OSHA official and DoD activity exercising securitysupervision over the workplace of need for a personnel securityclearance to enter the closed area.b. In case of Federal OSHA officials, the USMC and DoDsecurity activity, after verifying need for a personnel securityclearance, shall contact the appropriate cognizant securityoffice and require verification of the Federal OSHA official'ssecurity clearance. If the OSHA official's name is not on theaccess list, the responsible security officer shall contact theOSHA regional or area office and request an appropriatelycleared OSHA official.c. In case of state OSHA officials, the USMC and DoDsecurity activity, after verifying the need for a personnelsecurity clearance, shall coordinate with the state OSHAofficial and request that the responsible office contact thenearest OSHA regional or area office for a cleared Federal OSHAofficial.7. Federal and state OSHA officials shall be accompanied ontheir inspections and investigations by ISO and ACOrepresentatives (as appropriate). DoD contractor’srepresentatives may also accompany them when requisite securityclearances are verified.8. Federal or state OSHA officials shall not be permitted totake photographs on any Marine Corps installation. Photosrequested by these officials shall be taken only by authorizedpersonnel and shall not be delivered to the requesting officialuntil all film, negatives and photos, have been fully screenedand classified by higher authority. Requests for documenteddata, sketches of military installations and equipment, reportsor design information such as noise levels, profiles, etc.,shall be forwarded to the appropriate screening official forsimilar action. This process shall normally be completed by thescreening official within a period of 15 working days fromreceipt of the material.9. The USMC and DoD contractor is responsible for resolvingissues related to citations or requests for delays, variances,tolerances or exemptions of applicable OSHA standards.8-6