Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Report Cards Report Writer
Report Card Codes
Code
CourseCellStart = 1
Print = Y or N
PrintDescription = Y or N
CharPerColumn = 3 or 5
IncludeSkills = Y or N
PrintWhichColumns= #, #, #...(1-
13)
CellHeight = #.## or Auto
TitleHeight = #.## (in inches)
DescriptionWidth = #.##
MinGradingColumnWidth = #.##
...BorderWidth = 0-3
Left, Right, Top, Bottom
TitleHorizontalAlign = Left, Right or
Center
Description
Start of the codes that define what prints in the
course section of the advanced box.
Determines whether the Courses section of the
skills table will print.
Determines whether or not to use the course
description. If set to ‘N’, the standard course name
will print. If set to ‘Y’, the course description will
print. Courses with no description will print the
standard course name.
Designates whether the 3 character or 5 character
report card column heading will print, as defined in
the report card column table in Customize RC.
Determines whether or not to print the skill
information associated with each course.
Specifies which grade columns will be printed.
Columns are identified by column number,
defined in Customize RC. Any or all of the
possible 13 columns may be set. This setting
overrides page 3 of the report writer
specifications.
Maximum height of each course cell. Text that will
not fit in this height will be truncated. Set to ‘Auto’
to have the Course cell AUTOCALC.
Height of the course title. Text that will not fit in this
height will be truncated.
Width of the course description cell. Text that will
not fit in this width will be truncated (AUTOCALC
overrides).
Minimum width of columns containing grades.
Column width will increase if needed to
accommodate grades, but it will not be lower than
this number.
Controls width of border around course cell.
0 = thin border, 3 = thick border
Determines the alignment, left-to-right, of the
course header titles.
Report Cards Manual 7-49