Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter 2
Enter Courses
Adding to & Editing the Course Section List
Section List Fields
When you press F2: SECT in the View/Edit Courses & Sections window, your cursor
will move to the section list. If the course already has sections, it will look similar to the
following:
Understanding Meeting Times
The time must be entered in a certain manner in order to be used by Scheduling Plus.
The program will display a warning message if you enter the time incorrectly. You can
have up to 24 blocks (periods) per day and up to an eight day rotation with each block
meeting no more than seven times within the rotation.
The blocks (periods) are lettered A to X. Because each block may meet up to 7 times in
your rotation, you could have A1, A2, A3, A4, A5, A6, and A7 blocks running through
X1, X2, X3, X4, X5, X6 and X7 blocks. It does not matter when these blocks actually
meet. On some days you can have H block first and A block last, and so on. Here is a
sample standard schedule for a school using a five day rotation with seven blocks
meeting in the same order each day:
2-14 Report Cards Manual