Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter 2
Enter Courses
Inspect/Change Specifications
Field Name
SG
EG
SIZE
REC
Description
This is the section’s start grade.
This is the section’s end grade.
This is the number of students in the section.
This is the section’s record number.
Print Reports
The F9: PRINT option allows you to print your Master Course List or Section List in a
variety of formats. Choose from the following options:
Regardless of which option you choose, the report will print to the window as long as
you have specification #4 on page 2 of the Specifications window set to “Yes”. See page
“5) PRINT PREVIEWER” on page 2-23.
From the Preview window, you can press F9: PRINT to print the report to paper. If you
would prefer to print the report immediately without generating the preview, change this
specification to No.
Inspect/Change Specifications
Select this option to look at or change the specifications associated with the Enter
Courses program, including the default settings for the View/Edit Courses & Sections
window and the location of your skills folder (used to send course skills to Grade
Quick).
There are three specification windows for this program. The first one is called the Initial
Specifications window. A description of the second page of specifications begins on
page “1) PRINT DEFAULTS FOR A NEW SECTION” on page 2-22. See the
explanation of the skills specifications under “Skills Specifications” on page 2-24.
2-18 Report Cards Manual