Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter D
Skills and Concepts
Interfacing with GradeQuick
with each linked skill are listed in the left hand columns. To view all skills for courses
in a students’ schedule, access the View Skills window from the
View/Change/Add/Drop program and press F7: All.
You may print all of the information shown in the View Skills window, by pressing F9:
Print.
• To enter skills grades, highlight the desired skill, and then press F3: Edit. Use the
Tab or Enter keys to select the appropriate marking period. Type any grade defined
in the grade table, and then press F10: Accept.
• To edit a skills grade, highlight the desired skill, and then press F3: Edit. Use the
Tab or Enter keys to highlight the grade to change. Type a new grade, and then press
F10: Accept to save and exit.
Interfacing with GradeQuick
The Skills-based Report Cards module interfaces with GradeQuick’s Skills feature, so
teachers can send both skills grades and conventional grades to Administrator’s Plus.
The skills linked to each course are first exported to GradeQuick so that teachers can
record grades for the skills set up in Administrator’s Plus. The grades teachers enter for
skills are exported along with the conventional grades and comments stored in the grade
book.
NOTE:
This section is limited the skill components of the Administrator’s Plus/GradeQuick
Interface. For complete instructions on setting up the interface, refer to the Administrator’s
Plus/GradeQuick Deluxe Interface Guide.
Preparing Administrator’s Plus
There are certain steps to take to prepare Administrator’s Plus before skills work
seamlessly with GradeQuick.
To Prepare Administrator’s Plus:
1 Log into Administrator’s Plus as the Supervisor and click
FileCustomizeS.O.S. Interface Options. The S.O.S. Interface Options
window appears.
2 Click the Specifications button under the heading “GradeQuick (Grade Book
Software)”.
D-10 Report Cards Manual