Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter D
Skills and Concepts
Box Code Definitions
Height = (# or Blank for “Auto”)
(Attendance)
The Attendance box Height in inches. If left blank (auto), the box height is determined
by the number of rows to print. If the available space is insufficient to print all the attendance,
then rows (from the bottom) will be truncated.
~HonorRollBoxStart~
~HonorRollBoxEnd~
(Attendance)
Indicates the start and end of the parameters for the Honor Roll box.
ImageLeft
(Image)
Determines the Left position of the image if EveryPage = “Y”. If EveryPage = N, the
ImageLeft parameter is ignored.
ImageTop
(Image)
Determines the Top position of the image if EveryPage = “Y”. This parameter is ignored
if EveryPage = “N”.
~ImageStart = #~
(Image)
~ImageEnd~
(Image)
Denotes the start and end of the image specification. Since multiple images can be defined
in a report, the # symbol in the ~ImageStart~ code is replaced by the image number.
The ~PrintImage = #~ command searches for this number and tells the program
where the image will print.
IncludeSkills=Y or N
(Advanced Specifications: Course)
If you wish the skills to print, this parameter is set to Y for Yes. Y is the default. There
may be a case where the course has skills but only certain grade levels use them. Setting
this to N, removes them from the report card.
Left=#.## (Draw Box)
Left indicates distance in inches from the left-hand margin.
LevelWidth=#.##
(Course Table)
Sets the width of the level column in inches. Default is .35.
MaxBoxDown=#
(Advanced Specifications: General)
This setting determines the number of courses to print in a column. If a high value is
set, the program fits the maximum number of boxes possible depending on page height.
Default is Auto
MiddleGap=#.##
(Honor Roll)
Sets the height of the gap between the title line and Honor Roll status line.
MinGradingColumnWidth=#.## (Course Table, Advanced Specifications:
Course)
Sets the width of the grading columns. After all the calculations, extra space is equally
distributed among the grading columns. It will never be less than 0.3. The default is .35
D-36 Report Cards Manual