Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Skills and Concepts
Box Code Definitions
:NarrativeCellStart
(Advanced Specifications:
Narratives)
:NarrativeCellEnd
Indicates the start and end of the parameters for the narratives.
NarrativeHeight=#.## or Auto
(Course Table)
If a narrative is to be printed, this command would set the height of this row. If Auto is
specified it takes the total text height, without truncating any information.
NumBoxAcross=#
(Advanced Specifications: General)
This setting determines the number of columns to place across the page for the course
cells in the Advanced Specifications box. If a high value is set, the program fits the
maximum number of boxes possible depending on page width. The default is 2.
Print=Y or N (Advanced Specifications: Course, Concept, Comment,
Narrative)
If you choose not to print a course, section, concept, or narrative section of the Advanced
Specification box, or the Attendance box, you can prevent it from printing by
setting this parameter to N for No. Default is set to Y.
~PrintAdvancedBox=#,WhichCourses=Z,Left=X,Top=Y~(Advance)
Determines the distance the Advance Box will print from the left and top margins respectively.
Since multiple Advance Boxes can be defined in a single report, “#” indicates
the Advance Box number. X is replaced by the number of inches(#.##) the
Advance Box will print from left margin. Y is replaced by the number of inches (#.##)
the Advance Box will print from the top margin. Z can equal: Skills, Nonskills, ALL,
ALLSkillsFirst,ALLNonSkillsFirst, Course numbers separated by commas.
121,221,50,60, or Range of Courses: 400-900, 200-300. Course numbers and range together:
121,400-500,600.
~PrintAttendanceBox=1, Left=X, Top=Y~
(Attendance)
Determines the distance the Attendance Box will print from the left and top margins respectively.
Since multiple Attendance Boxes can be defined in a single report, “#” indicates
the Advance Box number. X determines the distance in inches the attendance
box will print from the left-hand margin. Y determines the distance down the page in
inches.
PrintBorder=Y or N
(Attendance, Honor Roll, GPA,
Draw, Course Table, Advance:
course, comment, concepts,
narrative)
Set this parameter to “Y” to print the borders around each box.
PrintBox=#, Left=X, Top=Y~
Determines where the Draw Box defined as with the corresponding specification number
(#) will print. X is replaced by the distance in inches (#.##) from the left margin. Y
is replaced by the distance in inches (#.##) from the top margin.
PrintColumnAveragesAndFont=Y or N (Course Table)
To change the font and size of the Average row, set the word PrintColumnAveragesAndFont
to the desired font and size required for the report. The default is black, Arial,
8 pitch and bold.
Report Cards Manual D-37