Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter 7
Report Cards Report Writer
Report Card Codes
Code
:ConceptCellEnd
NarrativeCellStart = # or Right
Print = Y or N
WidthIfRight = #.##
CellHeight = #.## (inches) or Auto
...BorderWidth = 0-3
Left, Right, Top, Bottom
TitleHorizontalAlign = Left, Right or
Center
Print Border = Y or N
TitleBorder = Y or N
TitleAndFont =
PrintBodyAndFont = Y or N
:NarrativeCellEnd
~AdvancedSpecEnd~
Description
End of the codes that define what prints in the
concept cells of the advanced box
Start of the codes that define what prints in the
Narrative cell. # determines the Narrative cell’s
print position after (below) the initial Course cell. If
‘Right’, narrative cell is printed on the right side of
the course box.
Determines whether or not the Narrative cell will
print.
If narratives are set to print to the right of each
course, use this code to set the width in inches of
the narrative box.
Specifies the Narrative cell height. “Auto” will
cause the cell height to AUTOCALC.
Controls width of border around narrative cell.
0 = thin border, 3 = thick border
Determines the alignment, left-to-right, of the
narrative header.
Specifies whether or not the narrative cell border
prints.
Designates whether or not a border will print
around the narrative title.
Determines the heading of the Narrative cell. Text
will adopt the specification line’s font and size
Determines whether or not narratives print in the
cell. If set to ‘N’, the narrative cell will remain
empty.
End of the codes that define what prints in the
narrative cells of the advanced box
End of the Skills table Specifications
7-52 Report Cards Manual