Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter D
Skills and Concepts
Box Code Definitions
ColumnHeaderHeight=#.##
(Attendance)
Indicates the height in inches of the column row. The default is .4
ColumnHeaderAndFont=
(Attendance, Course Table,
Advanced Specifications: Course)
To change the font and size of the Column Header, set the word ìColumnHeaderFontî
to the desired font and size required for the report. If this specification is omitted from
the code, the default is black, Arial, 8 pitch and bold.
ColumnHeadersAndFont=
(DateQtr1,DateQtr2,DateQtr3,DateQtr4,DateQtr5,DateQtr6,DateRCSpecRange,
DateYTD,Total)
(Attendance)
Any or all of these parameters in any order, separated by comments, may be set.
DateQtr1 prints the first day in the calendar to the last day of Qtr1 as entered in the Calendar
specifications. DateRCSpecRange prints RCRW specs #A & #B. DateYTD
prints “Year to ”. Anything else prints as entered. The header is
printed with the font of this code. Each word may be substituted to a text string of your
choice. Instead of dates, you may use 1 st , 2 nd ,3 rd , 4 th , etc.
ColumnWidth=#.##
(Attendance)
Indicates the width of data columns in inches. If the ColumnWidth keyword is not specified.
The default is Auto.
ContentAndFont#=Text String
(Draw Box)
This keyword requires a text string. If a Draw Box requires more than one text string
additional ContentAndFont lines may be added. The # sign indicates the line # of the
text string. These numbers should be sequential such as ContentAndFont1=(Text
String), ContentAndFont2=(Text String). To create an empty box on the report card
simply set the border to .01 and leave the ContentAndFont line blank.
:CommentCellStart=#
(Advanced Specification:
Comment)
:CommentCellEnd
The start and end of the comment cell parameters in an Advanced Specification Box.
The parameter lets you determine what order you want the comment, concept and narrative
box to print.
CommentHeight=#.## or Auto
(Course Table)
When comments are printed below a course, the height of the row of the comment box
is determined by this command. If auto is specified it takes the total text height, without
truncating any information.
CommentWidth=#.##
(Course Table)
Sets the width of the comment columns in inches. If the comments are printed in two
separate columns, then both the columns are of equal width. The default is 1.5.
:ConceptsCellStart=#
(Advanced Specifications:
Concepts)
:ConceptsCellEnd
The start and end of the comment cell parameters. The parameter lets you determine
what order you want the comment, concept and narrative box to print.
D-34 Report Cards Manual