Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Skills and Concepts
Box Code Definitions
TitleAndFont=
(Attendance, Course Table, GPA,
Honor Roll, Advanced Specifications:
Course, Comment, Concept,
Narratives)
To print text at the top of the box, type the text string after the equal sign. The font and
size of the text string determines how it will appear on the report. Use ~CR~ as part of
the text to insert a line break.
For example, Course~CR~Information will print as:
Course
Information
Course ~CR~~CR~Information is printed as:
Course
Information
TitleBorder=Y or N
(Course Table, Advanced Specifications:
Course, Comment, Concepts,
Narratives; Attendance)
To draw a border around the title set this specification to Y for Yes. The default is N
for No.
TitleHeight=#.##
(Course Table; Advanced specifications:
Course; Attendance)
A title may be placed at the top of the course box in a cell of its own. The height of this
cell is set in inches. (Course Table, default is .5; Advanced Specifications: Course, default
is .3, Attendance, default is .2)
TitleHorizontalAlign=Left, Right, Center (Attendance, Course Table, Advance
GPA, Honor Roll, Advance:
comment, concept, course narrative)
The title can be set to print from left aligned, right aligned or centered. The default is
centered.
Top=#.##
(Draw Box)
In the Draw Box, top indicates distance from the top margin in inches.
VerticalBodyAlign=Top,Bottom,Center (Course Table)
Sets the positioning of the text in the subject and averages row to either print at the top,
bottom or center. The default is the center.
Width = (# or Blank for “Auto”)
(Attendance)
Sets the width of the Attendance box. If left blank (Auto), the box width is determined
by the number of columns to print. If the available space is insufficient to print all the
attendance, then columns (from the right) will be truncated.
Zoom = 100
(Image)
Determines the zoom percentage of an image. If Zoom = 100 the image will be printed
as its actual size, Zoom = 200 prints the image with double the size. Setting a value
for the Zoom parameter causes the Stretch parameter value to be ignored.
Report Cards Manual D-41