Administrator's Plus Report Cards Manual - Rediker Software, Inc.

Chapter 1
Customize RC
Customize Report Card Columns
If your school has six marking periods, you can modify the four-marking period default
table to read as follows:
This report card column table does not have any unused columns. The heading line of a
report card using every possible column might appear as follows:
SUBJECT 1st 2nd 3rd S1EX SEM1 4th 5th 6th S2EX SEM2 FINAL COM 1 COM2 CRDTS TEACHER
You can change the title of any column in the table. For each column, you will have to
enter the following information:
Column Title
25
CHARACTER
NAME
5 CHARACTER
NAME
3 CHARACTER
NAME
Description
This column name will be used in windows in the software which
specify which column(s) to use for a particular task. Entering a zero “0”
indicates to the program that the column will not be used.
This column name will be used to construct the heading line on the
wide report card. If you use less than the five characters, it is suggested
that you center the characters you do use for appearance sake. For
example, if you enter “1st” as your five character name, enter it as “1st
“, that is, center the 3 characters within the five character box.
This column name will be used to construct the heading line on the
narrow report card, permanent label, and transcript.
1-6 Report Cards Manual