ModelSim SE User's Manual - Electrical and Computer Engineering

Formatting the Wave window UM-257
3 Specify the divider name in the Wave Divider Properties dialog. The default name is
New Divider. Unnamed dividers are permitted. Simply delete "New Divider" in the
Divider Name field to create an unnamed divider.
4 Specify the divider height (default height is 17 pixels) and then click OK.
You can also insert dividers with the -divider argument to the add wave command (CR-52).
Working with dividers
Splitting Wave window panes
The table below summarizes several actions you can take with dividers:
Action Method
Move a divider Click-and-drag the divider to the desired location
Change a divider’s
name or size
Right-click the divider and select Divider Properties
Delete a divider Right-click the divider and select Delete
The pathnames, values, and waveforms panes of the Wave window display can be split to
accommodate signals from one or more datasets. For more information on viewing multiple
simulations, see Chapter 8 - WLF files (datasets) and virtuals.
To split the window, select Insert > Window Pane.
ModelSim SE User’s Manual