MCSA/MCSE Self-Paced Training Kit (Exam 70-270): Installing ...

6. In the list of installed hardware, scroll to the bottom and click Add A New Hardware
Device. Click Next.
7. Click Install The Hardware That I Manually Select From A List (Advanced), and
then click Next.
8. In the list of common hardware types, click Printers and then click Next.
9. On the Select A Printer Port page, in the Use The Following Port drop-down list,
click LPT2: (Printer Port), and then click Next.
10. On the Install Printer Software page, in the Manufacturer list, click Royal. In the
Printers list, select Royal CJP 450. Click Next.
11. On the Name Your Printer page, click Next.
12. On the Print Test Page page, select No and then click Next.
13. If you are using Windows XP Professional and you have Simple File Sharing disabled,
you next will see a page asking whether you want to share the new printer.
Select Do Not Share This Printer, and then click Next.
14. Click Finish to exit the Add Hardware Wizard.
Lesson Review
Use the following questions to help determine whether you have learned enough to
move on to the next lesson. If you have difficulty answering these questions, review
the material in this lesson before beginning the next lesson. You can find answers to
these questions in the “Questions and Answers” section at the end of this chapter.
1. When you initiate automatic hardware installation by starting the Add Hardware
Wizard, what does Windows XP Professional query the hardware about?
2. _______________________ are channels that allow a hardware device, such as a
floppy disk drive, to access memory directly (without interrupting the microprocessor).
Fill in the blank.
3. Why would you install a hardware device manually?
Lesson Summary
Lesson 1 Installing a Hardware Device
■ For most Plug and Play hardware, you connect the device to the computer, and
Windows XP Professional automatically configures the new settings. For non–Plug
and Play hardware, Windows XP Professional often identifies the hardware and
6-9