FTOS Configuration Guide for the C-Series - Force10 Networks

The following example shows the rmon event command:
Force10(conf)#rmon event 1 log trap eventtrap description “High ifOutErrors” owner nms1
Figure 62 rmon event Command Example
The above configuration example creates RMON event number 1, with the description “High ifOutErrors”,
and generates a log entry when the event is triggered by an alarm. The user nms1 owns the row that is
created in the event table by this command. This configuration also generates an SNMP trap when the
event is triggered using the SNMP community string “eventtrap”.
Configure RMON collection statistics
To enable RMON MIB statistics collection on an interface, use the RMON collection statistics command
in interface configuration mode. To remove a specified RMON statistics collection, use the no form of this
command.
Command Syntax Command Mode Purpose
[no] rmon collection statistics
{controlEntry integer} [owner
ownername]
The following command enables the RMON statistics collection on the interface, with an ID value of 20
and an owner of “john”:
Figure 63 rmon collection statistics Command Example
CONFIGURATION controlEntry: Specifies the RMON group of statistics
using a value.
integer: A value from 1 to 65,535 that identifies the
RMON Statistics Table. The value must be unique in
the RMON Statistic Table.
owner: (Optional) Specifies the name of the owner of
the RMON group of statistics.
ownername: (Optional) Records the name of the
owner of the RMON group of statistics. Default is a
null-terminated string
Force10(conf-if-mgmt)#rmon collection statistics controlEntry 20 owner john
FTOS Configuration Guide, version 7.7.1.0 131