MVME5100 Single Board Computer Programmer's Reference Guide

PCI Interrupt Acknowledge Register
Registers
The PCI Interrupt Acknowledge Register (PIACK) is a read only register
that is used to initiate a single PCI Interrupt Acknowledge cycle. Any
single byte or combination of bytes may be read from, and the actual byte
enable pattern used during the read will be passed on to the PCI bus. Upon
completion of the PCI interrupt acknowledge cycle, the PHB will present
the resulting vector information obtained from the PCI bus as read data.
Address $FEFF0030
Bit
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
Name PIACK
Operation R
Reset $00000000
http://www.motorola.com/computer/literature 2-87
2