Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.8 Composite Processing OperationsPermit No. 13120Expiration Date: September 12, 2013Page 139 of291EU 8.3 Puget Sound Clean Air Shall not emit in excess ofO.05gr/dscffrom II.A. I (c) Facility PugetAgency Reg I, 9.09 equipment used in a manufacturing process Inspections Sound(4/9/98) and general process units, uncorrected for Clean Airexcess air II.A.I(b) AgencyWAC 173-400-060 Complaint Method 5(3/22/91) This Response (Seerequirement will beTheseSectionsuperseded uponmonitoring VIII)adoption of themethods2/10/05 version ofsupersede theWAC 173-400-060monitoringupon its adoption intomethod for thisthe SIPrequirementWAC 173-400-060listed in I.A.2(2/10/05) (State Only),This requirement willbecome federallyenforceable uponadoption into the SIPand will replace the3/22/91 version ofWAC 173-400-040(1)060EU 8.4 Puget Sound Clean Air Maintain equipment in good working order II.B OperationAgency Reg I: 9,20(a) that has received an NOC Order of and Maintenance(6/9/88) Approval. (O&M) PlanRequirements,RCW 70.94,152(7)1996 (State Only)II,A, I (c) FacilityInspectionsEU8.5 Puget Sound Clean Air Reg, II, Section 3,08 applies to NMRAgency Regulation II: manufacturing operations involving the use3,08(a) (12/9/93) of polyester, vinyl ester, gelcoat, or resin inwhich the styrene monomer is a reactivemonomer for the resin.Boeing-Everett Permit, issued September J 2, 2008; Administrative Amendment 3: October 10, 2012