Air Operating Permit - Puget Sound Clean Air Agency

II. MONITORING, MAINTENANCE, AND RECORDKEEPING Permit No. 13120Expiration Date: September 12, 2013Page 215 of291• PSD-91-01, Amendment 2: Boeing will, upon request, report the quantities and VOCcontent of the cleaning solutions and paints and the VOC emissions from Building 45-04annually to the Department of Ecology and the Puget Sound Clean Air Agency. [PSD91-01 Amendment 2, Condition 2,8/00]• PSD-91-06, Amendment 2: Boeing shall maintain on site and annually update a list of allprimers, topcoats, temporary protective coatings, CIC coatings, and cleaning solutionsused in Model 777 assembly operations described in Findings 1 through 4 ofPSD 91-06,Amendment 2, within the immediately past twenty-four months, and the correspondingMSDSs or other manufacturer-supplied data on VOC content. [PSD-91-06 Amendment2, Condition 15 and 16, 6113/05]• Boeing shall report the types, quantities and VOC content of the CICs, cleaning solutionsand paints and the VOC emissions aonually from Model 777 assembly operationsdescribed in Findings 1 through 4 ofPSD 91-06 to the Puget Sound Clean Air Agency.[PSD 91-06 Amendment 2, Condition 19, 6/13/05]• PSD-05-02:VOCs are defined in 40 CFR 51.100(s). [PSD-05-02, Condition 5, 8/25/05]Boeing shall separately quantifY for Paint Hangar Final Exterior Coating, 787 FinalAssembly, and Interiors Manufacturing the VOCs of each VOC-containing material usedeach calendar month, and calculate the corresponding totals over the previous twelvemonths. Example: For Paint Hangar Final Exterior Coating, the calculation will showeach VOC containing material used in a given month and the corresponding VOC total.[PSD-05-02, Condition 6.1,8/25/05].Boeing will determine VOC content from the corresponding MSDSs or othermanufacturer-supplied data. [PSD-05-02, Condition 6.2, 8/25/05]Boeing may deduct from the total calculated pursuant to PSD-05-02, Condition 6.1:o Any VOCs that are included in the coating formulation as reactive components tothe extent that they are incorporated into the final, cured airplane coating asverified by the coating vendor documentation. [PSD-05-02, Condition 6.3.1,8/25/05]Boeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10,2012