Air Operating Permit - Puget Sound Clean Air Agency

EMISSION UNIT SPECIFIC REQUIREMENTSLB.9 Abrasive Blasting OperationsPermit No. 13120Expiration Date: September 12, 2013Page 156 of2919. Abrasive Blasting OperationsDESCRIPTION:This section includes all activities and equipment associated withabrasive blasting operations on production parts, tooling, orequipment which exhaust to the outside and have specific applicablerequirements other than the general requirements in Section LAoThe table below does not necessarily include all units that may besubject to the requirements 0.[ this section; units that have not receivedan Order of Approval or were not previously registered with the PugetSound Clean Air Agency are not included in the table.Order ofInstallBldg.Col.!Dr. MSSIID# Approval #DateSource DescriJ2"'ti"'on"-______ _40-10A-25 153470 5402 511/94 Abrasive blast boothData in italics are for information only and are not enforceable conditions of this permit.Boeing-Everett Permit, issued September 12, 2008; Administrative Amendment 3: October 10, 2012